Neue Publikationen in Ziel-Venues – 2026-11-09
Neue Werke: 137 · davon mit DE-Affiliation: 137 Konferenz-Durchgang ab Jahrgang 2025 · letzter Lauf: 2026-11-09T04:31:40
European Microwave Conference (EuMC) — 67 neu · conference
Highly-Efficient On-Chip Bow-Tie Antennas Using Localized Backside Etching at 220–320GHz ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748369
- Metadaten: Erschienen: 2026-10-01 · S. 89-92 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Fraunhofer Institute for Reliability and Microintegration; Universität Ulm
- Autoren:
- Raqibul Hasan — Leibniz Institute for High Performance Microelectronics (DE)
- Seyyid M. Dilek — Leibniz Institute for High Performance Microelectronics (DE)
- Aniello Franzese — Leibniz Institute for High Performance Microelectronics (DE)
- Uwe Maaß — Fraunhofer Institute for Reliability and Microintegration (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Dietmar Kissinger — Universität Ulm (DE)
- Corrado Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Antenna Design and Analysis; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: bow-tie antenna; on-chip antenna; J-band; sub-terahertz antennas; radiation efficiency; bandwidth extension; silicon substrate; millimeter-wave transceivers
- Abstract: This paper presents the design of wideband and highly-efficient on-chip bow-tie antennas operating at the J-band (220–320GHz). The proposed antennas employ localized backside etching (LBE) to remove the silicon underneath the antenna area improving radiation efficiency. Two variants are designed: a standard bow-tie antenna and a stub-loaded bow-tie antenna. The standard bow-tie antenna achieves a boresight realized gain of 9.6dBi, a 3-dB gain bandwidth of 42GHz, and a 10-dB return loss bandwidth of 68GHz. A simulated maximum radiation efficiency of 76% has been achieved, while the stub-loaded bow-tie antenna attains a boresight realized gain of 9.6dBi, a 3-dB gain bandwidth of 62GHz, and a 10-dB return loss bandwidth of 74GHz, with a simulated maximum radiation efficiency of 73%, demonstrating a promising bandwidth-extension technique suitable for mm-wave and sub-THz transceivers utilizing on-chip antennas.
Characteristics of the Sub-THz Radio Channel at 158 and 300 GHz in a Street Canyon Scenario ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748273
- Metadaten: Erschienen: 2026-10-01 · S. 941-944 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute; Rohde & Schwarz (Germany)
- Autoren:
- Alper Schultze — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Michael Peter — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Wilhelm Keusgen — Technische Universität
- Taro Eichler — Rohde & Schwarz (Germany) (DE)
- Topics: Millimeter-Wave Propagation and Modeling; Terahertz technology and applications; Advanced Wireless Communication Techniques
- Keywords: street canyon; 300 GHz; path loss model; floating intercept model; delay spread; angular spread; frequency dependence; millimeter-wave propagation
- Abstract: This paper compares the sub-THz radio channel characteristics at 158 and 300 GHz in a street canyon scenario by extracting three different path loss models and various channel parameters. The path loss models extracted are two single frequency models, the close-in (CI) and floating-intercept (FI) model, and one multi frequency model, the alpha-beta-gamma (ABG) model. The channel parameters analyzed include the delay spread and the angular spread, which show a strong frequency dependency for this environment.
A 28-GHz Reconfigurable Intelligent Surface with Continuous Phase Control: Implementation and Experimental Validation ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748300
- Metadaten: Erschienen: 2026-10-01 · S. 825-828 · OpenAlex seit 2026-11-03
- DE-Institutionen: RWTH Aachen University; Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Spandan Manna — RWTH Aachen University (DE)
- Florian Reher — RWTH Aachen University (DE)
- Karim El Isa — RWTH Aachen University (DE)
- Amar Al-Bassam — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Dirk Heberling — RWTH Aachen University (DE)
- Topics: Advanced Antenna and Metasurface Technologies; Advanced Wireless Communication Technologies; Antenna Design and Analysis
- Keywords: reconfigurable intelligent surface; varactor diodes; two-dimensional beam steering; millimeter wave; 28 GHz; parasitic modeling; unit cell design
- Abstract: This work presents the design, implementation, and experimental validation of a varactor-based reconfigurable intelligent surface (RIS) operating at 28 GHz for continuous phase control and 2D beam-steering capability. The proposed unit cell incorporates a varactor diode with realistic parasitic modeling, enabling reliable performance prediction in the millimeter-wave regime. First, unit cell design with a maximum phase tuning range of approximately 300° is achieved at the design frequency. Then, a 96-element RIS prototype is fabricated and integrated with a dedicated control unit on the backside enabling 12-bit voltage control. The beam steering capabilities are experimentally validated in a compact antenna test range under bistatic illumination conditions. The measurement results show good agreement with simulations, with a maximum beam deviation of approximately 2° at the largest steering angle.
Spatial Resolution Analysis of a Dielectric Waveguide Near Field Sensor for Surface Characterization ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748305
- Metadaten: Erschienen: 2026-10-01 · S. 1065-1068 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Josua Schnarr — Ruhr University Bochum (DE)
- Thomas Musch — Ruhr University Bochum (DE)
- Marcel van Delden — Ruhr University Bochum (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Electromagnetic Compatibility and Measurements; Microwave Engineering and Waveguides
- Keywords: dielectric waveguides; near-field sensors; spatial resolution; surface characterization; subsurface characterization; electromagnetic field confinement; sensor design parameters; electromagnetic simulation
- Abstract: Characterization of material surfaces and subsurfaces is of significant interest for various industrial and scientific applications. For these tasks, sensor systems with high spatial resolution are essential. Rectangular Dielectric Waveguides (DWG) enable high spatial resolution by providing tightly confined electromagnetic fields. This work analyzes both the design parameters and the resulting spatial resolution of such systems. To investigate these properties, electromagnetic (EM) simulations were conducted and subsequently validated through experimental radar measurements. The results demonstrate that the DWG-based sensors achieve a spatial resolution of a radius of approximately 1 mm.
A Fully SDR-based Interferometric Harmonic Radar for Locating Passive Harmonic Transponders ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748343
- Metadaten: Erschienen: 2026-10-01 · S. 461-464 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Freiburg
- Autoren:
- Moritz Schabinger — University of Freiburg (DE)
- Thomas Schaechtle — University of Freiburg (DE)
- Fabian Höflinger — University of Freiburg (DE)
- Stefan J. Rupitsch — University of Freiburg (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; RFID technology advancements
- Keywords: harmonic radar; software-defined radio; third harmonic; UHF RFID tags
- Abstract: Harmonic radar enables robust detection of passive nonlinear tags in strong linear clutter. In this contribution, we propose a phase-coherent harmonic interferometric radar, which is, for the first time, fully based on a commercial off-the-shelf (COTS) software-defined radio (SDR) platform. Harmonic signal processing is performed entirely in the digital domain, requiring only a minimal front end comprising a power amplifier, a high- and a low-pass filter. The radar illuminates a tag with a continuous wave (CW) at 866.5MHz and observes the third harmonic at 2.5995GHz for interferometric localization. Path-length changes to a harmonic tag are resolved over a distance of 3m in strong linear clutter for an avalanche rescue tag and a passive ultra-high-frequency (UHF) radio-frequency identification (RFID) tag. The results show that phase-coherent harmonic radar can be realized with COTS SDR hardware and provide the basis for UAV-borne harmonic synthetic aperture radar.
Demonstration of 300 GHz Non-line-of-sight TCP-IP Link Enabled by Reflective Surface ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748041
- Metadaten: Erschienen: 2026-10-01 · S. 265-268 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Rita Younes — Centre National de la Recherche Scientifique (FR); Université de Lille (FR); Institut d'Electronique, de Microélectronique et de Nanotechnologie (FR)
- Frédéric Dutin — Centre National de la Recherche Scientifique (FR); Université de Lille (FR); Institut d'Electronique, de Microélectronique et de Nanotechnologie (FR)
- Davy Paul Gaillot — Centre National de la Recherche Scientifique (FR); Université de Lille (FR); Institut d'Electronique, de Microélectronique et de Nanotechnologie (FR)
- Pascal Szriftgiser — Centre National de la Recherche Scientifique (FR); Université de Lille (FR); Laboratoire de Physique des Lasers, Atomes et Molécules (FR)
- Víctor Torres — Anteral
- Jorge Teniente — Universidad Pública de Navarra (UPNA) (ES)
- Itziar Maestrojuán — Anteral
- Simon Haußmann — University of Stuttgart (DE)
- Lukas Gebert — University of Stuttgart (DE)
- Ingmar Kallfass — University of Stuttgart (DE)
- A. Tessmann — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sandrine Comparsi WAGNER — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sébastien Chartier — Fraunhofer Institute for Applied Solid State Physics (DE)
- Carlo Lanzoni — Robopac-TechLab
- Gabriele Canini — Robopac-TechLab
- … und 2 weitere
- Topics: Millimeter-Wave Propagation and Modeling; Terahertz technology and applications; Optical Wireless Communication Technologies
- Keywords: terahertz communication; non-line-of-sight propagation; reflective surfaces; H-band; link budget; high-gain antenna; industrial wireless networks
- Abstract: This paper presents a proof of concept of a Non-Line-of-Sight Terahertz communication link enabled by a reflective surface to unlock limitation of point-to point Line-of-Sight use cases, with validation of the link using real internet protocol frames. The system is composed of E-band modems, first characterized in back-to-back measurements in the WR-12 (E-band). The THz over-the-air link budget analysis is performed based of the integration of the reflective surface with dedicated THz front-ends that extend the E-band to H-band (WR-3). The proof-of-concept is done in a lab configuration with a 12 meters link and high gain antennas. This is a first milestone for the use of THz bands in indoor industrial scenarios for network-to-machines or machines-to-machines connections.
Evaluation of Real-Time Optically Corrected Probing of RF Devices with Different Probe Types ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748360
- Metadaten: Erschienen: 2026-10-01 · S. 353-356 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut; Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute
- Autoren:
- Domenico Vitali — Ferdinand-Braun-Institut (DE)
- Alessandro Chillico — Ferdinand-Braun-Institut (DE)
- Wojciech Samek — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Olof Bengtsson — Ferdinand-Braun-Institut (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Electromagnetic Compatibility and Measurements; Microwave Engineering and Waveguides
- Keywords: optical probing; S-parameter measurement; image analysis; cross correlation function; phase error; high-frequency measurement
- Abstract: An optical-based method to track the skating of coplanar waveguide (CPW) probes for Radio Frequency (RF) on-wafer measurements is evaluated for different probe types. The method is shown to be directly applicable to three probe types. The skating is reliably tracked and S-parameter measurements of CPW lines up to 40 GHz show overlapping 95% confidence intervals in the phase measurements and vector errors in the -40 dB range. For another probe type, a modification to the image analysis, based on two-dimensional cross-correlation, is required due to the lack of contrast between the surface of the probe-tips and the wafer’s pads. With the modified algorithm for the fourth probe type, all probes show the same precision in the skating. Comparison of the modified algorithm with the older method for the reference probe type shows agreement in S-parameter measurements. This work confirms the general applicability of the proposed method.
A Fully-Integrated 61 GHz ISM-Band CW SIMO Medical Radar for Multi-Patient Monitoring ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748329
- Metadaten: Erschienen: 2026-10-01 · S. 849-852 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Fraunhofer Institute for Reliability and Microintegration; Medizinische Universität Lausitz - Carl Thiem; Brandenburg University of Technology Cottbus-Senftenberg; Ferdinand-Braun-Institut
- Autoren:
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Vladica Sark — Leibniz Institute for High Performance Microelectronics (DE)
- Yanhua Zhao — Leibniz Institute for High Performance Microelectronics (DE)
- Ayse Ecem Bezer — Fraunhofer Institute for Reliability and Microintegration (DE)
- Uwe Maaß — Fraunhofer Institute for Reliability and Microintegration (DE)
- Alexander Gäbler — Fraunhofer Institute for Reliability and Microintegration (DE)
- Robert Holzschuh — Medizinische Universität Lausitz - Carl Thiem (DE)
- Hui Lu — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Mohamed Hussein Eissa — Leibniz Institute for High Performance Microelectronics (DE)
- Wolfgang Heinrich — Ferdinand-Braun-Institut (DE)
- Corrado Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Gerhard Kahmen — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Non-Invasive Vital Sign Monitoring; Wireless Body Area Networks; Radio Frequency Integrated Circuit Design
- Keywords: continuous wave radar; vital sign detection; VCO; digital beamforming; low-power integrated circuits; bedside monitoring
- Abstract: This paper presents a fully-integrated CW medical radar developed to operate at the 61 GHz ISM-band for vital signs sensing. The proposed system consists of frontend, baseband, and data acquisition boards combined in a housing suitable for deployment under beds. The frontend integrates low-voltage and low-power SiGe-based transceiver and VCO ICs using low-loss flip-chip transitions with high gain and low sidelobe level antenna arrays on-board. Each one of the four transceiver ICs offers one transmit and two receive channels while the system is configured to use one transmit and eight receive antennas in SIMO operation for monitoring multiple patients using digital beamforming. The ICs developed for high energy-efficiency consume a total dc power of only 0.4 W under continuous operation. The radiation pattern measurements show an EIRP of 17 dBm with a sidelobe rejection level of 14.5 dBc. The system has been evaluated with a human subject and cardiac signals have been clearly identified, demonstrating readiness for near term medical applications.
PLL-Based Control of Dielectric Resonator Oscillator with High Bandwidth and Dynamic ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748307
- Metadaten: Erschienen: 2026-10-01 · S. 885-888 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Robin Kaesbach — Ruhr University Bochum (DE)
- Marcel van Delden — Ruhr University Bochum (DE)
- Topics: Advancements in PLL and VCO Technologies; Radio Frequency Integrated Circuit Design; Microwave Dielectric Ceramics Synthesis
- Keywords: phase-locked loop; dielectric resonator oscillator; frequency tuning; double closed-loop control; phase noise; frequency drift compensation; self-characterization; temperature effects
- Abstract: In this paper, an automatically tuned and phase-locked loop-stabilized (PLL) dielectric resonator oscillator with simultaneous mechanical and electrical tuning is presented. A dual loop control reduces phase noise and eliminates even large drift effects with separate fine and coarse adjustments derived from the loop filter output. A programmable limiter ensures stable and continuous operation of the PLL by preventing tuning ranges where loss of oscillation could occur. Self-characterization automatically maps tuning range over frequency to simplify the initial setup for different oscillators and to measure temperature effects. Operation is demonstrated over a continuous tuning range of 12.7… 13.6GHz or 6.8% and temperature changes of 0… 60°C. At 13.0GHz closed-loop phase noise of -104dBc/Hz at 10kHz offset and integrated jitter of 27.1fs in 100Hz…1MHz is achieved.
Monolithically Integrated Doherty PA for Band n104 Massive-MIMO Arrays ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748134
- Metadaten: Erschienen: 2026-10-01 · S. 305-308 · OpenAlex seit 2026-11-03
- DE-Institutionen: Infineon Technologies (Germany); Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Christian Musolff — Infineon Technologies (Germany) (DE)
- Helmut Brech — Infineon Technologies (Germany) (DE)
- Alexander Deublein — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- David Riess — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Michael Loose — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Advanced Power Amplifier Design; GaN-based semiconductor devices and materials; Radio Frequency Integrated Circuit Design
- Keywords: Doherty power amplifier; monolithic microwave integrated circuits; massive MIMO; power combiner; drain efficiency; peak-to-average power ratio; GaN-on-Si; FR3 band
- Abstract: This paper presents a monolithically integrated final-stage Doherty PA delivering 2W of average output power in band n104 (6.425–7.125GHz). An innovative combiner design approach based on coupled planar inductors is introduced, which provides low insertion loss as well as favorable out-of-band termination conditions and low area usage. The final stage design reaches 46–48% modulated drain efficiency using a clipped 100-MHz 5G-NR signal with a PAPR of 8.1dB while occupying a chip area of only 4mm2, enabling cost-competitive integration on Infineon’s latest RFGaN-on-Si MMIC process. The combination of high RF performance, dense integration and low cost makes this solution a promising candidate for 6G massive-MIMO radio front-ends at FR3 frequencies.
On-Board Spherical Dielectric Resonator for Concurrent Antenna and High-Q Resonator Operation ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748147
- Metadaten: Erschienen: 2026-10-01 · S. 861-864 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart
- Autoren:
- Ahmed Nasheed — University of Stuttgart (DE)
- Jan Hesselbarth — University of Stuttgart (DE)
- Topics: Antenna Design and Analysis; Microwave Engineering and Waveguides; Microwave and Dielectric Measurement Techniques
- Keywords: high-Q resonators; millimeter-wave antennas; dual-mode operation; radiation leakage; 30 GHz; 60 GHz; 10 GHz band; mechanical tolerances
- Abstract: A spherical dielectric resonator is presented with dual-mode simultaneous operation, acting concurrently as a high-Q resonator and as an antenna radiator around 30 GHz. The dielectric sphere made of alumina is excited through a tangentially placed thin microstrip board. The board comprises perpendicularly oriented excitations for the resonator mode and the antenna radiator mode. Operation is facilitated by an optimized planar boundary atop the spherical resonator, behaving as a short for one mode while being electrometrically transparent for the other mode. The dual-functional top boundary causes some radiation leakage of the high-Q resonator, but an unloaded Q of 143 was measured at 32.5 GHz. On the other hand, the antenna radiator radiation pattern at 33.3 GHz is minimally affected by the presence of the top boundary. Scaling to other frequency is demonstrated for 10 GHz as well as for 60 GHz bands, but the latter implementation indicates critical mechanical tolerances causing severe performance degradation in the experiment.
A 220–290GHz Differential PA in 130-nm SiGe BiCMOS with 12.6dBm OP1dB and 5.4% PAE1dB ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748066
- Metadaten: Erschienen: 2026-10-01 · S. 33-36 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Technische Universität Dresden
- Autoren:
- Mete Kaan Lermi — Sabancı Üniversitesi (TR)
- Aniello Franzese — Leibniz Institute for High Performance Microelectronics (DE)
- Seyyid M. Dilek — Leibniz Institute for High Performance Microelectronics (DE)
- Franz Alwin Dürrwald — Technische Universität Dresden (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Mohamed Hussein Eissa — Leibniz Institute for High Performance Microelectronics (DE)
- Yaşar Gürbüz — Sabancı Üniversitesi (TR)
- Corrado Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Analog and Mixed-Signal Circuit Design
- Keywords: power amplifier; SiGe BiCMOS; 130 nm technology; two-stage amplifier; power-added efficiency; millimeter wave
- Abstract: In this work, a compact and high-efficiency power amplifier (PA) spanning a 3-dB bandwidth of 220–290GHz is presented in an advanced 130-nm SiGe BiCMOS technology with fT/fmaxof 500/610GHz. The design is based on a two-stage pseudo-differential cascode topology. The output stage combines two unit cells using an ultra-low loss combiner with an insertion loss of only 0.85dB. Measured results demonstrate a peak gain of 14.7dB, achieving more than 7dB per stage. Moreover, the PA achieves an output referred 1-dB compression point (OP1dB) of 12.6dBm at 250GHz. Power-added efficiency (PAE1dB) of 5.4% is recorded, which represents state-of-the-art efficiency for silicon-based technology beyond 200GHz. This high-performance design is realized using a core silicon area of only 0.13mm2.
Life Cycle Assessment and Circularity Strategies of GaN-on-SiC Substrates for RF ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748223
- Metadaten: Erschienen: 2026-10-01 · S. 53-56 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Freiburg
- Autoren:
- Max Mosig — University of Freiburg (DE)
- Benjamin Amann — University of Freiburg (DE)
- Rüdiger Quay — University of Freiburg (DE)
- Topics: Environmental Impact and Sustainability; GaN-based semiconductor devices and materials; Green IT and Sustainability
- Keywords: GaN-on-SiC; high electron mobility transistors; life cycle assessment; circular economy; recycling; reuse; resource consumption
- Abstract: The resource consumption of semiconductors for modern electronics is of growing concern, particularly in the context of sustainable development. It is well known that semiconductor production consumes critical amounts of materials, energy and water, but detailed data remain scarce. Using the life cycle assessment method, this study assesses the environmental impact of GaN-on-SiC for high-electron-mobility transistor (HEMT) devices. GaN-HEMTs offer high efficiencies, enabling smaller chip footprints and lower operational energy consumption. Following the 9R-framework of circular economy, potential circularity strategies reduce, reuse and recycle are discussed. The results demonstrate that switching to renewable energies or by implementing a lift-off method, the impact can be reduced drastically. By providing detailed data on the production of power and radio frequency devices, and presenting circularity strategies, this work supports informed and sustainability-oriented decision-making.
A Phase-Matched Monolithic Orthomode Transducer via Stereolithography 3D Printing ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748106
- Metadaten: Erschienen: 2026-10-01 · S. 161-164 · OpenAlex seit 2026-11-03
- DE-Institutionen: Max Planck Institute for Physics
- Autoren:
- Giacomo Giannetti — Max Planck Institute for Physics (DE)
- Topics: Microwave Engineering and Waveguides; Antenna Design and Analysis; Radio Frequency Integrated Circuit Design
- Keywords: orthomode transducer; phase matching; turnstile junction; stereolithography 3D printing; dark matter searches; port isolation; cross-polarization; insertion loss
- Abstract: A phase-matched orthomode transducer (OMT) based on the folded turnstile junction is designed. A monolithic prototype is then realized in plastic using stereolithography 3D printing and metallized using a silver-loaded paint. The specimen covers the WR42 bandwidth (18-26.5GHz) for dark matter search and shows return loss, isolation between rectangular ports, and cross polarization exceeding 11dB, 29dB and 27dB, respectively; the average insertion loss is 2.6dB, the magnitude and phase imbalances are less than 0.46dB and 5.5°, respectively.
A MMIC-Based 14GHz Dual Driver Doherty Power Amplifier Using Improved GaN/Si Technology ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748042
- Metadaten: Erschienen: 2026-10-01 · S. 301-304 · OpenAlex seit 2026-11-03
- DE-Institutionen: Infineon Technologies (Germany); Fraunhofer Institute for Applied Solid State Physics; University of Freiburg
- Autoren:
- D.A. Pandya — Infineon Technologies (Germany) (DE)
- Christian Schuberth — Infineon Technologies (Germany) (DE)
- Stefan Bernhofer — Infineon Technologies (Germany) (DE)
- Sudip Ghosh — Infineon Technologies (Germany) (DE)
- Thomas Maier — Fraunhofer Institute for Applied Solid State Physics (DE)
- Samer Al-Harazi — Nokia Technology Center Ulm
- Helmut Brech — Infineon Technologies (Germany) (DE)
- Rüdiger Quay — University of Freiburg (DE)
- Topics: Advanced Power Amplifier Design; GaN-based semiconductor devices and materials; Radio Frequency Integrated Circuit Design
- Keywords: Doherty power amplifier; GaN-on-Si; MMIC; 14 GHz; maximum efficiency; back-off efficiency; adaptive digital predistortion
- Abstract: This paper reports on the design and implementation of a symmetric dual-driver Doherty power amplifier (DPA) operating at 14 GHz, utilising the next-generation of GaN-on-Silicon technology. Under pulsed conditions, the proposed DPA offers an average peak efficiency of 40%, a -6 dB back-off efficiency of 31% and an average gain of 26 dB while delivering a peak output power of 40 dBm between 13.4 GHz and 14.2 GHz. Further, the DPA is excited with a 10×20 MHz LTE20 signal; the measured line-up efficiency and gain are 24.6% and 23 dB. With DPD applied, the measured ACPRmaxis -51 dBc, and EVM is less than 0.6%. Moreover, the performance of the DPA is compared with a two-stage class AB amplifier, designed in the same technology. At 14 GHz, an improvement of 8% is recorded. To the best of the author’s knowledge, this is the first time a dual-driver DPA has been successfully designed and reported in a 250nm GaN/Si MMIC technology at 14GHz.
DGS-enhanced 5G NR FR3 Antenna Development and Validation for Joint Communication and Sensing ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748231
- Metadaten: Erschienen: 2026-10-01 · S. 873-876 · OpenAlex seit 2026-11-03
- DE-Institutionen: Barkhausen Institut
- Autoren:
- Merve Tascioglu Yalcinkaya — Barkhausen Institut (DE)
- Padmanava Sen — Barkhausen Institut (DE)
- Yash Richhariya — Barkhausen Institut (DE)
- Gerhard Paul Fettweis — Barkhausen Institut (DE)
- Topics: Antenna Design and Analysis; Advanced Antenna and Metasurface Technologies; Radar Systems and Signal Processing
- Keywords: integrated sensing and communication; defected ground structure; co-located antennas; 10 GHz band; antenna miniaturization; isolation bandwidth; 6G
- Abstract: Joint Communication and Sensing (JCAS) is emerging as a key enabler for sixth generation (6G) systems, integrating communication and sensing within a shared hardware and waveform framework. Efficient hardware integration requires antennas with high Tx and Rx (TRX) isolation and a small form factor – contradicting requirements. To address this, the paper investigates co-located TRX antennas operating in the fifth generation New Radio ( 5G-NR) Frequency Range 3 (FR3) bands and proposes a Defected Ground Structure (DGS)-based isolation enhancement technique. The proposed DGS structure improves peak antenna isolation from 30 dB to 53 dB (measured) at 10 GHz and provides a 250 MHz (measured) isolation bandwidth for a 40 dB isolation level within the overlapping impedance and isolation bandwidth. In addition to antenna measurements, a unified communication–radar system using a single waveform and receiver is evaluated, and the impact of co-located TRX antennas on radar and communication performance is analyzed.
Ultra-low phase noise photonic microwaves enabled by a Difference Frequency Comb ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748267
- Metadaten: Erschienen: 2026-10-01 · S. 1105-1107 · OpenAlex seit 2026-11-03
- DE-Institutionen: Toptica Photonics (Germany)
- Autoren:
- Thomas Puppe — Toptica Photonics (Germany) (DE)
- Sebastian Müller — Toptica Photonics (Germany) (DE)
- Mikhail Volkov — Toptica Photonics (Germany) (DE)
- Topics: Advanced Photonic Communication Systems; Advanced Fiber Laser Technologies; Advancements in PLL and VCO Technologies
- Keywords: photonic microwave generation; ultra-low phase noise; optical frequency division; single-sideband phase noise; RF signal generation; terahertz generation; frequency combs
- Abstract: Frequency-comb-based generation of RF and THz signals with record-low phase noise becomes an enabling technology for a variety of applications from spectroscopy to communication. Here, using an offset-free difference frequency comb, we report ultra-low noise 9.6GHz microwaves reaching single-sideband phase noise of –102dBc/Hz at 1Hz offset frequency and -166dBc/Hz above 10kHz, respectively, using optical frequency division (OFD).
Reconfigurable RF Power Detector Using Aperture Time of a SAR ADC ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748201
- Metadaten: Erschienen: 2026-10-01 · S. 61-64 · OpenAlex seit 2026-11-03
- DE-Institutionen: Brandenburg University of Technology Cottbus-Senftenberg
- Autoren:
- Prabhav Manchanda — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Cristina Andrei — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Ulrich L. Rohde — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Matthias Rudolph — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advanced Power Amplifier Design; Analog and Mixed-Signal Circuit Design
- Keywords: RF power detection; envelope detection; successive approximation register ADC; sample-and-hold circuit; diode detectors; variable impedance; STM32 microcontroller; beat frequency measurement
- Abstract: Reconfigurable load control is a key mechanism for tuning the operating point and sensitivity of RF envelope detectors. This paper demonstrates that the sample-and-hold input stage of a standard successive-approximation register (SAR) analog-to-digital converter (ADC) presents a variable, acquisition-time-dependent impedance to a diode detector’s output node, without any external components. Adjusting only the ADC sampling time register of an STM32G474 microcontroller changes the detector’s measured DC output voltage. Single-tone measurements at 2.66GHz show a repeatable DC output variation of up to 200mV across sampling modes. Two-tone measurements at 2.66 GHz using a 1 Hz beat frequency demonstrate envelope detection, where the DC component varies by approximately 125mV while the beat amplitude increases from 35mV to 680mV over the input power range. The same ADC that presents this variable impedance simultaneously digitizes the output, enabling a firmware-controlled RF sensing front-end without additional hardware.
Linear-to-Circular Polarization Converter for D-Band Circular Dielectric Waveguides ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748304
- Metadaten: Erschienen: 2026-10-01 · S. 153-156 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Bremen
- Autoren:
- Debrina Dutta — University of Bremen (DE)
- Abhijit Pal — University of Bremen (DE)
- Martin Schneider — University of Bremen (DE)
- Topics: Microwave Engineering and Waveguides; Antenna Design and Analysis; Microwave and Dielectric Measurement Techniques
- Keywords: linear-to-circular polarization converter; D-band; phase shifters; polarization mismatch
- Abstract: A linear-to-circular polarization converter for lower D-band frequencies is presented. The device converts the linearly polarized TE10mode of a standard rectangular waveguide WR6.5 into a circularly polarized (CP) HE11mode in a hollow-core Polytetrafluoroethylene (PTFE) circular dielectric waveguide (CDWG) of diameter 1.73 mm. The setup uses a stepped transition from rectangular to a 45° rotated square waveguide, followed by a phase shifter that generates a phase shift of 90° between the two orthogonal field components. A prototype operating from 115 to 135 GHz is designed, fabricated and validated using vector network analyzer (VNA) and anechoic chamber measurements. A measured return loss better than 15 dB and an insertion loss of 0.7–0.85 dB is achieved for the full chain. This converter could be used for launching circular polarization into CDWGs in order to mitigate polarization mismatch issues.
Dynamic Range Comparison of SFCW and FMCW Waveforms for Vector Network Analysis ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748046
- Metadaten: Erschienen: 2026-10-01 · S. 677-680 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Ali Al-Tayar — Ruhr University Bochum (DE)
- Justin Romstadt — Ruhr University Bochum (DE)
- Vincent Lange-Nowak — Ruhr University Bochum (DE)
- Nils Pohl — Ruhr University Bochum (DE)
- Ilona Rolfes — Ruhr University Bochum (DE)
- Jan Barowski — Ruhr University Bochum (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Electromagnetic Compatibility and Measurements; Microwave Engineering and Waveguides
- Keywords: vector network analyzer; dynamic range; heterodyne detection; intermediate frequency bandwidth; noise floor; W-band
- Abstract: In this work, a direct comparison of the system dynamic range achieved with FMCW and SFCW excitation is presented using a heterodyne measurement setup utilizing frequency extender modules. While SFCW-based vector network analyzers provide high dynamic range and precise characterization, they suffer from long measurement times. In contrast, FMCW signals enable fast measurements while still maintaining high dynamic ranges. The effect of IF bandwidth, ramp duration and trace averaging on the noise floor of FMCW signals is analyzed. Measurement results in the W-band show that FMCW excitation can achieve a dynamic range comparable to SFCW measurements, despite significantly shorter measurement times.
Benchmarking TRL, LRM, and LRRM On-Wafer Calibrations for Silicon Technologies at D-Band ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748067
- Metadaten: Erschienen: 2026-10-01 · S. 485-488 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics
- Autoren:
- Aniello Franzese — Leibniz Institute for High Performance Microelectronics (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Seyyid M. Dilek — Leibniz Institute for High Performance Microelectronics (DE)
- Farabi Ibne Jamal — Leibniz Institute for High Performance Microelectronics (DE)
- S. Schulze — Leibniz Institute for High Performance Microelectronics (DE)
- Dirk J. Hagen — Leibniz Institute for High Performance Microelectronics (DE)
- Dirk Wolansky — Leibniz Institute for High Performance Microelectronics (DE)
- Marco Spirito — Delft University of Technology (NL)
- Corrado Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Microwave Engineering and Waveguides; Terahertz technology and applications
- Keywords: on-wafer calibration; TRL calibration; D-band; thin film resistors; parasitic reactance; inductance measurement; repeatability
- Abstract: This contribution investigates accurate on-wafer calibration techniques for the characterization of silicon-based circuits and passive components above 100GHz. The work benchmarks LRM and LRRM calibration methods at D-band with conventional TRL. The load standard is enabled by a precise match realized with a newly developed thin film resistor (TFR). The proposed TFR exhibits low parasitic reactance and low wafer-level variability, enabling accurate LRM/LRRM calibration. A systematic comparison based on worst-case error bounds and DUT measurements, considering a series 50-Ω TFR and a straight line 23-pH inductor, demonstrates that LRM and LRRM achieve accuracy comparable to TRL, while improving measurement robustness and repeatability. These results establish TFR-based LRM/LRRM as comparable alternatives to TRL for sub-THz on-wafer measurements.
Low-Complexity 3D-Printed Monolithic Dielectric Cover–Lens Structure for Flexible Gain Enhancement of Sub-THz On-Chip Antennas ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748120
- Metadaten: Erschienen: 2026-10-01 · S. 541-544 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Leonhard Hahn — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Tobias Bader — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Tim Pfahler — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Christian Carlowitz — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Gerald Gold — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Antenna Design and Analysis; Microwave Engineering and Waveguides; Terahertz technology and applications
- Keywords: on-chip antenna; sub-terahertz antennas; gain enhancement; terahertz systems
- Abstract: This paper presents a novel, low-complexity, low-cost 3D-printed dielectric cover concept for enhancing and flexibly designing the gain of sub-THz on-chip antennas (AoC). Mounted directly on the AoC to improve baseline performance, the cover monolithically combines a lens-based director with a thin supporting carrier. Unlike conventional approaches, which rely on heterogeneous material stacks or complex integration of directive elements, the proposed design uses a single material, and the integrated carrier allows fast, reproducible, and fully reversible mounting. This substantially reduces fabrication complexity and assembly effort. To illustrate the performance of the presented approach, an AoC 3D-printed dielectric cover is designed and fabricated that operates up to 300GHz, achieves 40GHz bandwidth, and provides a broadband gain enhancement of up to 12dB, with a measured peak gain of 7.2dBi. The concept of the 3D-printed dielectric cover can be readily adapted to alternative AoC and director topologies. Low complexity, short turnaround times, and versatile adaptability make the approach promising for integrated high-performance, multi-channel THz systems.
A Microfluidic-Integrated Silicon Dielectric Slot Waveguide Sensor for Fluid Characterization ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748361
- Metadaten: Erschienen: 2026-10-01 · S. 1089-1092 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Kristof Dausien — Ruhr University Bochum (DE)
- Tobias Körner — Ruhr University Bochum (DE)
- Marcel Alver Burfeindt — Ruhr University Bochum (DE)
- Paulami Das — Ruhr University Bochum (DE)
- Martin Hoffmann — Ruhr University Bochum (DE)
- Christian Schulz — Ruhr University Bochum (DE)
- Ilona Rolfes — Ruhr University Bochum (DE)
- Jan Barowski — Ruhr University Bochum (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Photonic and Optical Devices; Microwave Engineering and Waveguides
- Keywords: fluid sensing; microfluidic channels; silicon micromachining; true-time delay
- Abstract: We present a dielectric slot waveguide (DSWG)-based fluidic sensor with an integrated asymmetric slab-to-slot mode converter for low-THz operation (260-400GHz). The sensor is silicon-micromachined and includes a microfluidic channel with reservoir feeding a fluid-filled sensing window. The slot region concentrates the electric field in the low-index gap for strong fluid interaction, while an interface DWG enables robust routing and input coupling. The transition is interpreted and designed using a coupled local-mode view and validated by full-wave simulations. Transmission is characterized by vector network analyzer (VNA) measurements and evaluated in the time domain via an inverse chirp-Z transform, showing an impulse response that reveals the sensor’s true-time-delay behavior and fluid-induced shifts. Measurements show that low-loss carrier fluids can preserve transmitted amplitude due to reduced effective index contrast and scattering, consistent with simulations. The platform enables low-THz fluid characterization and screening of carrier-fluid compatibility for future sensing applications.
A Frequency Doubler Operating from 200 up to 250 GHz Optimized by Harmonic Termination ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748177
- Metadaten: Erschienen: 2026-10-01 · S. 29-32 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Lukas Gebert — University of Stuttgart (DE)
- Benjamin Schoch — University of Stuttgart (DE)
- Thomas Ufschlag — University of Stuttgart (DE)
- Sébastien Chartier — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sandrine Comparsi WAGNER — Fraunhofer Institute for Applied Solid State Physics (DE)
- Ingmar Kallfass — University of Stuttgart (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advanced Power Amplifier Design; Microwave Engineering and Waveguides
- Keywords: frequency doubler; harmonic termination; load-pull simulation; local oscillator; superheterodyne receiver; third harmonic suppression; buffer amplifier; millimeter-wave circuits
- Abstract: This paper presents a frequency multiplier by two with a subsequent buffer amplifier designed for the use as local oscillator chain in a superheterodyne sub-THz transceiver. The frequency multiplier is designed using harmonic load-pull simulations considering the fundamental, the second and third harmonic to determine the optimal harmonic termination for the frequency components. The local oscillator chain is designed for an input frequency range from 100–120GHz. The overall chain achieves an output power of 4dBm with an 3dB radio frequency bandwidth of more than 40GHz from 210–250GHz, a measured third harmonic suppression of more than 50dBc and an efficiency of more than 4%.
Validation of a Tuner-Based Single-Path Dual-Band Backscatter Tag for FDD Communication ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748186
- Metadaten: Erschienen: 2026-10-01 · S. 469-472 · OpenAlex seit 2026-11-03
- DE-Institutionen: Brandenburg University of Technology Cottbus-Senftenberg
- Autoren:
- Jonathan Okocha — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Matthias Rudolph — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Topics: Energy Harvesting in Wireless Networks; RFID technology advancements; IoT Networks and Protocols
- Keywords: backscatter communication; frequency division duplex; dual-band operation; bit error rate; antenna coupling
- Abstract: This paper presents experimental validation of simultaneous frequency-division duplexing (FDD) communication using a tuner-based single-path dual-band backscatter tag. The system operates at 868 MHz for uplink and 1300 MHz for downlink using a single antenna and a tunable impedance network. By appropriately selecting impedance states, strong backscatter modulation is achieved at the uplink frequency while maintaining structured perturbation at the downlink frequency. Measurements demonstrate that reliable decoding is achievable under simultaneous dual-band operation. The measured Bit-Error Rate (BER) results confirm that communication remains reliable despite coupling effects.
Dynamic Monitoring of Drying Processes Through Overmoded Circular Waveguides Using a D-Band FMCW Radar ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748026
- Metadaten: Erschienen: 2026-10-01 · S. 1085-1088 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum; Otto-von-Guericke-Universität Magdeburg; TU Dortmund University
- Autoren:
- Javagar Mahendran — Ruhr University Bochum (DE)
- Manuel Funk — Ruhr University Bochum (DE)
- Felix Faber — Otto-von-Guericke-Universität Magdeburg (DE)
- Alba Diéguez Alonso — TU Dortmund University (DE)
- Christian Schulz — Ruhr University Bochum (DE)
- Nicole Vorhauer-Huget — Otto-von-Guericke-Universität Magdeburg (DE)
- Ilona Rolfes — Ruhr University Bochum (DE)
- Jan Barowski — Ruhr University Bochum (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Microwave Engineering and Waveguides; Radar Systems and Signal Processing
- Keywords: drying process monitoring; D-band; FMCW radar; microwave imaging; non-destructive testing
Superconducting MMIC Bandpass/Bandstop Diplexer Using a Simplified Design Procedure ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748366
- Metadaten: Erschienen: 2026-10-01 · S. 141-144 · OpenAlex seit 2026-11-03
- DE-Institutionen: Physikalisch-Technische Bundesanstalt; Federal Institute For Materials Research and Testing
- Autoren:
- Abdulrahman H. A. Widaa — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- Christoph Kissling — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- Oliver Kieler — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- Michael Haas — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- J. Kohlmann — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- Mark Bieler — Physikalisch-Technische Bundesanstalt (DE); Federal Institute For Materials Research and Testing (DE)
- Topics: Superconducting and THz Device Technology; Microwave Engineering and Waveguides; Acoustic Wave Resonator Technologies
- Keywords: low-temperature superconductivity; complementary filter; Butterworth filter; stopband attenuation; out-of-band rejection; spurious suppression; cryogenic characterization
- Abstract: In this paper, an MMIC low-temperature superconducting complementary Butterworth bandpass/bandstop diplexer is presented using a straightforward design procedure. First, the bandpass filter lumped-element circuit is synthesized. Then, the bandstop filter circuit is realized by directly swapping the bandpass LC tanks into bandstop sections, forming a broadband matched complementary bandpass/bandstop pair. Following the proposed design procedure, 1GHz 4th-order superconducting niobium filters and diplexers are designed, fabricated, and cryogenically characterized at 4.2K in liquid helium. Besides the very compact footprint, the implemented designs exhibit low insertion loss better than 0.2dB, high stopband attenuation reaching 70dB, improved out-of-band rejection with multiple transmission zeros, and excellent spurious-free performance up to 15GHz.
Photonic Vector Network Analyzer for Agile Channel Sounding Across the Sub-THz Spectrum ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748058
- Metadaten: Erschienen: 2026-10-01 · S. 937-940 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute; Rohde & Schwarz (Germany); Toptica Photonics (Germany)
- Autoren:
- Ramez Askar — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Garrit Schwanke — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Timo B. Noack — Rohde & Schwarz (Germany) (DE)
- Nico Vieweg — Toptica Photonics (Germany) (DE)
- Thomas Puppe — Toptica Photonics (Germany) (DE)
- Sebastian Müller — Toptica Photonics (Germany) (DE)
- Albrecht Neudecker — Toptica Photonics (Germany) (DE)
- Robert B. Kohlhaas — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Michael Peter — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Gerd Hechtfischer — Rohde & Schwarz (Germany) (DE)
- Taro Eichler — Rohde & Schwarz (Germany) (DE)
- Topics: Advanced Photonic Communication Systems; Terahertz technology and applications; Millimeter-Wave Propagation and Modeling
- Keywords: wireless channel characterization; over-the-air calibration; 300 GHz; temporal resolution
- Abstract: This paper presents the design and implementation of an agile sub-terahertz (sub-THz) photonic channel sounder capable of characterizing wireless propagation channels within the 100 GHz to 1 THz frequency range. The sounder is based on a novel photonic vector network analyzer (pVNA) principle that employs a frequency-sweep-and-sample approach. This design enables precise and tunable carrier-frequency generation, sweeping, and sampling, thereby overcoming the bandwidth limitations of traditional VNAs. Experimental evaluations highlight the system’s high temporal resolution (100 ps) and broadband performance (10 GHz), and demonstrate over-the-air calibration and monostatic channel measurements across three sub-THz bands (155 GHz, 300 GHz, and 450 GHz). The results establish the feasibility of the pVNA-based channel sounder as a powerful and versatile tool for measuring various widely separated and distributed sub-THz bands.
Blind Maximum Ratio Combining via Second-Order Statistics under Unequal Noise Powers ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748203
- Metadaten: Erschienen: 2026-10-01 · S. 945-948 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leipzig University of Applied Sciences
- Autoren:
- Constantin Wimmer — Leipzig University of Applied Sciences (DE)
- Marco Krondorf — Leipzig University of Applied Sciences (DE)
- Topics: Advanced Wireless Communication Techniques; Radar Systems and Signal Processing; Wireless Communication Networks Research
- Keywords: second-order statistics; diversity combining; blind equalization; subsampling; multi-antenna receivers; channel estimation
- Abstract: The use of multiple sensors at the receiver allows for the implementation of diversity combining techniques resulting in improved signal quality and reliability. Maximum ratio combining (MRC) is known to provide the optimal signal-to-noise ratio (SNR) at the output among all linear combining schemes. The weights depend on the channel gains and noise variances of each receive branch, which are often unknown in practice. This motivates the development of blind algorithms in cases where training sequences or pilot symbols are not available. Existing methods either rely on non-Gaussianity of the transmitted signal or assume spatially white noise across all branches. In this paper, we propose a blind MRC reception scheme which works with different noise powers regardless of the signal distribution. The approach only requires the noise to be temporally white and the transmitted signal not to be sampled at symbol rate.
A Pad-Integrated Broadband THz 1 to 4 T-Marchand Hybrid Balun-Splitter Using Asymmetric Coupled Lines ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748100
- Metadaten: Erschienen: 2026-10-01 · S. 177-180 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Wuppertal
- Autoren:
- Xinpeng Du — University of Wuppertal (DE)
- Marcel Andree — University of Wuppertal (DE)
- Ullrich R. Pfeiffer — University of Wuppertal (DE)
- Topics: Microwave Engineering and Waveguides; Radio Frequency Integrated Circuit Design; Superconducting and THz Device Technology
- Keywords: Marchand balun; T-junction; SiGe; matching networks; amplitude and phase imbalance
- Abstract: This work presents an on-chip, pad-integrated, broadband 1:4 balun-splitter implemented in 130-nm SiGe technology for sub-THz and THz applications. The design utilizes a hybrid T-junction and Marchand balun topology, where an asymmetric coupled transmission line (ASCL) analysis is employed to co-design the signal pads and the passive core, absorbing pad parasitics into the matching network to achieve large bandwidth. Two sets of the proposed balun-splitter, with different interstage transmission line lengths in a back-to-back configuration, were fabricated and characterized. The measurement results demonstrate that the balun-splitter achieves a 3 dB insertion-loss bandwidth of 193 (223-416) GHz and a -10 dB return-loss bandwidth of 241 (233-474) GHz. In addition, simulations indicate in-band amplitude and phase imbalances less than 1.4 dB and 6.2°, respectively.
A RT–FDTD Hybrid Framework for Electromagnetic Wave Propagation in Multiscale Environments ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748051
- Metadaten: Erschienen: 2026-10-01 · S. 633-636 · OpenAlex seit 2026-11-03
- DE-Institutionen: Technical University of Munich; Huawei Technologies (Germany)
- Autoren:
- Huseyin Kayihan Comert — Technical University of Munich (DE)
- Aristeidis Lamprianidis — Independent Researcher
- Antonios Giannopoulos — University of Edinburgh (GB)
- Yun Chen — Huawei Technologies (Germany) (DE)
- Amelie Hagelauer — Technical University of Munich (DE)
- Topics: Electromagnetic Simulation and Numerical Methods; Electromagnetic Scattering and Analysis; Millimeter-Wave Propagation and Modeling
- Keywords: ray tracing; finite-difference time-domain simulation; electromagnetic wave propagation
- Abstract: This work proposes a framework for hybridizing Ray Tracing (RT) and Finite-difference time-domain (FDTD) methods to model electromagnetic wave phenomena in multi-scale environments. We combine the strengths of the two methods by introducing FDTD inclusions (containing electrically fine geometric details) within an RT background (characterized by electrically coarse geometric details), and we develop wave in-bouncing and out-bouncing methods that allow bidirectional interactions between the two domains. Our introduced framework lays the groundwork for an efficient yet accurate solver that hybridizes the RT and FDTD methods to address complex electromagnetic wave propagation in multi-scale environments.
Phase Change Calibration for S-Parameter Applications with many Ports in Cryogenic Environment ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748090
- Metadaten: Erschienen: 2026-10-01 · S. 1160-1163 · OpenAlex seit 2026-11-03
- DE-Institutionen: Physikalisch-Technische Bundesanstalt
- Autoren:
- Karsten Kuhlmann — Physikalisch-Technische Bundesanstalt (DE)
- Jaime Öhlmann — Physikalisch-Technische Bundesanstalt (DE)
- Frauke Kathinka Helene Gellersen — Physikalisch-Technische Bundesanstalt (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Calibration and Measurement Techniques; Advanced Electrical Measurement Techniques
- Keywords: S-parameter calibration; low-temperature measurement; superconducting transition; measurement uncertainty; microwave measurement; cryostat
- Abstract: A new MPC (Multiple Phase Change) calibration method for S-parameter measurements in a cryogenic environment is proposed. The method has the potential to enable calibrated results with low measurement uncertainties, without the need for electrical or mechanical switches, and within a single cool-down. It is based on the phase transition of selected materials to the superconducting state. The calibration is demonstrated using simulated data, and the associated uncertainties are analyzed. DC (Direct current) measurements in a cryostat confirm the feasibility of the assumed material parameters used in the simulation.
Seven-State Reconfigurable Intelligent Surface at X-band Using Shunt-Stub Varactor Tuning ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748318
- Metadaten: Erschienen: 2026-10-01 · S. 1045-1048 · OpenAlex seit 2026-11-03
- DE-Institutionen: Institute for Mobile and Satellite Communication Technology
- Autoren:
- Kaan Aktas — Institute for Mobile and Satellite Communication Technology (DE)
- Martin Petek — Politecnico di Torino (IT)
- Enrico Tolin — Institute for Mobile and Satellite Communication Technology (DE)
- Achim Bahr — Institute for Mobile and Satellite Communication Technology (DE)
- Francesca Vipiana — Politecnico di Torino (IT)
- Topics: Advanced Antenna and Metasurface Technologies; Advanced Wireless Communication Technologies; Antenna Design and Analysis
- Keywords: reconfigurable intelligent surface; varactor tuning; X-band; linear phase response; beam steering; wideband antenna; sidelobe level; 6G
- Abstract: This paper presents a novel Reconfigurable Intelligent Surface (RIS) unit-cell concept based on a shunt-stub tuning configuration utilizing a single varactor. The proposed design achieves a linear phase response across a broad X-band range (9.2-10.6GHz), reaching a 270° phase shift to provide near 3-bit resolution. The RIS panel demonstrates a minimum of 11% 1dB gain fractional bandwidth with the sidelobe levels (SLL) below -10dB while achieving a beam steering up to 50°. With minimized hardware complexity the design offers an energy-efficient, wideband, and wide-angle coverage solution for 6G wireless networks.
A Q-Band GaN Doherty-Like OLMBA with Single RF Input ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748316
- Metadaten: Erschienen: 2026-10-01 · S. 673-676 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Daje Weber-Trebesch — Fraunhofer Institute for Applied Solid State Physics (DE)
- Christian Friesicke — Fraunhofer Institute for Applied Solid State Physics (DE)
- Leon Hertle — Fraunhofer Institute for Applied Solid State Physics (DE)
- Thomas Maier — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fouad Benkhelifa — Fraunhofer Institute for Applied Solid State Physics (DE)
- Rüdiger Quay — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Advanced Power Amplifier Design; Microwave Engineering and Waveguides; Advanced Photonic Communication Systems
- Keywords: GaN power amplifier; Q-band; power back-off; high-efficiency power amplifier
Antenna Characterization Methodology for Backside-Radiating D-Band Integrated Dielectric Resonator Antenna Array Using Teflon Fixture ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748093
- Metadaten: Erschienen: 2026-10-01 · S. 741-744 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Karlsruhe Institute of Technology; Infineon Technologies (Germany)
- Autoren:
- Kanaka Joy — Leibniz Institute for High Performance Microelectronics (DE)
- Muhammad F. Bashir — Leibniz Institute for High Performance Microelectronics (DE)
- Thomas Voss — Leibniz Institute for High Performance Microelectronics (DE)
- Jens Lehmann — Leibniz Institute for High Performance Microelectronics (DE)
- Jorg Domke — Leibniz Institute for High Performance Microelectronics (DE)
- Sascha Mehl — Leibniz Institute for High Performance Microelectronics (DE)
- Elizabeth Bekker — Karlsruhe Institute of Technology (DE)
- Akanksha Bhutani — Infineon Technologies (Germany) (DE)
- Matthias Wietstruck — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Antenna Design and Analysis; Electromagnetic Compatibility and Measurements; Radio Frequency Integrated Circuit Design
- Keywords: D-band; antenna characterization; SiGe BiCMOS; antenna gain; S11 measurement; millimeter-wave antennas
- Abstract: This work addresses the measurement challenges of D-Band 2×2 dielectric resonator antenna array fabricated using 130 nm SiGe BiCMOS BEOL technology with additional localized backside etch. Measuring highly integrated antenna poses significant challenges, especially when the antenna is radiating from the backside and the RF probing is performed from the front side. To address this, custom made Teflon fixture using CNC (Computer Numerical Control) is used for holding the chips for the RF probe-based measurements. The antenna is measured across the D-Band (110-170 GHz) and the measured peak antenna gain at 136.4 GHz is 7.18 dBi, while the measured S11parameter is below -10 dB over the entire D-Band, demonstrating the effectiveness of the proposed measurement approach.
Wideband, High Gain D-Band Glass Antenna via LIDE 3D Structuring and 3D-Printed Mask for Selective Metallization ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748362
- Metadaten: Erschienen: 2026-10-01 · S. 85-88 · OpenAlex seit 2026-11-03
- DE-Institutionen: Karlsruhe Institute of Technology
- Autoren:
- Elizabeth Bekker — Karlsruhe Institute of Technology (DE)
- Michael Lootze — LPKF Laser & Electronics AG
- Yiyang Bao — Karlsruhe Institute of Technology (DE)
- David Reichenbacher — Karlsruhe Institute of Technology (DE)
- Luca Valenziano — Karlsruhe Institute of Technology (DE)
- Malte Schulz‐Ruhtenberg — LPKF Laser & Electronics AG
- Thomas Zwick — Karlsruhe Institute of Technology (DE)
- Topics: Antenna Design and Analysis; Microwave Engineering and Waveguides; Advanced Antenna and Metasurface Technologies
- Keywords: dielectric resonator antenna; D-band; selective metallization; sputtering; electroplating; antenna-in-package; high-gain antenna; wideband antenna
- Abstract: This paper presents a monolithic hybrid surface mount short-horn (SMSH)-dielectric resonator antenna (DRA) in BF33 glass fabricated by LPKF’s laser-induced deep etching (LIDE)®. The monolithic fabrication reduces assembly effort and alignment errors. Selective metallization of the horn is achieved using a removable 3D-printed mask together with sputtering followed by electroplating. LIDE’s parallel, high-precision micromachining enables batch fabrication of many identical components-both technologies supporting scalable antenna-in-package systems. To the best of the authors’ knowledge, this is the first use of a 3D-printed mask to selectively metallize a non-planar antenna and the first successful LIDE realization of fully three-dimensional glass structures. The wideband SMSH-DRA delivers a peak measured gain of 10.6 dBi, representing the highest reported gain for a glass DRA to date. Measured bandwidth and radiation patterns validate performance across D-band frequencies effectively.
Accurate Modeling of On-Wafer Standards for Characterization of InP HBTs Using 16-Term Calibration ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748105
- Metadaten: Erschienen: 2026-10-01 · S. 477-480 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut
- Autoren:
- Abhijeet Kanitkar — Ferdinand-Braun-Institut (DE)
- Ralf Doerner — Ferdinand-Braun-Institut (DE)
- W. Heinrich — Ferdinand-Braun-Institut (DE)
- Thomas Flisgen — Ferdinand-Braun-Institut (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Radio Frequency Integrated Circuit Design; Advanced Power Amplifier Design
- Keywords: on-wafer calibration; calibration standards; InP HBT; emitter width
- Abstract: This work focuses on the development of models of the actual calibration standards required for on-wafer 16-term calibration. The calibration standards are modeled using three approaches: 1) conventional 8-term calibration, 2) assuming ideal standard responses, and 3) incorporating the standards’ non-ideal behavior. The model development methodologies are discussed in detail. The error networks are obtained from 16-term algorithm by considering the three model development methodologies. Using this approach, 500 nm emitter width InP HBTs are characterized by performing on-wafer measurements up to 67 GHz. The statistical analysis of the 16-term calibrated transistor fmaxvalues confirms that the precise modeling of the actual standards significantly decreases the uncertainties in the extraction of transistor fmax.
Design and Evaluation of a Crosspolar Surface Dipole Antenna for Tracing Applications ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748214
- Metadaten: Erschienen: 2026-10-01 · S. 929-932 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- E. Gramlich — Ruhr University Bochum (DE)
- N. Karsch — Ruhr University Bochum (DE)
- J. Schorlemer — Ruhr University Bochum (DE)
- B. Hattenhorst — 2π-Labs GmbH
- Marcel van Delden — Ruhr University Bochum (DE)
- I. Rolfes — Ruhr University Bochum (DE)
- Thomas Musch — Ruhr University Bochum (DE)
- Topics: Antenna Design and Analysis; Advanced Antenna and Metasurface Technologies; Microwave Engineering and Waveguides
- Keywords: cross-polarized antennas; 2.5 GHz; tracking applications; copper electrodeposition
- Abstract: A cross-polarized meander dipole antenna fabricated on a spherical surface for localization and tracing purposes is presented and investigated. The antenna design was first analyzed using full-wave electromagnetic field solvers to evaluate the influence of the spherical substrate material and the geometric parameters of the meandered structure. The antenna was designed on a spherical substrate with a diameter of 20mm to operate at a frequency of 2.5GHz. The fabrication was carried out using 3D spherical masks and a sputtering process, followed by copper electroplating to achieve sufficient electrical conductivity. Finally, the fabricated antenna was experimentally characterized using a bistatic measurement system.
Novel GaN-based Full-Duplex Front-End Topology ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748339
- Metadaten: Erschienen: 2026-10-01 · S. 981-984 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut; Brandenburg University of Technology Cottbus-Senftenberg
- Autoren:
- Valerie Fetzer — Ferdinand-Braun-Institut (DE)
- Andreas Wentzel — Ferdinand-Braun-Institut (DE)
- Deguang Sun — Ferdinand-Braun-Institut (DE)
- Megha Krishnaji Rao — Ferdinand-Braun-Institut (DE)
- Thomas Hoffmann — Ferdinand-Braun-Institut (DE)
- Patrick Scheele — Ferdinand-Braun-Institut (DE)
- Matthias Rudolph — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Topics: Full-Duplex Wireless Communications; Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design
- Keywords: full-duplex communication; GaN MMIC; self-interference cancellation; quarter-wave transmission line; low noise amplifier; class-E power amplifier; hybrid modules; drain efficiency
- Abstract: This paper presents a novel full-duplex (FD) front-end topology implemented on a hybrid GaN-based module for 5G FR1 frequency band around 4GHz. The new concept exploits the quarter-wave transmission line (λ/4-line) characteristics to perform cancellation in the analog domain. Therefore, it allows to omit the traditional isolation stage in the propagation domain like circulator or electric-balanced duplexer (EBD). The GaN-based demonstrator includes a rugged low-noise amplifier (LNA) Monolithic Microwave Integrated Circuit (MMIC) with a noise figure (NF) of 1.3dB and a gain of 24.5dBm and a digital class-E power amplifier (PA) MMIC with 34dBm output power and final-stage drain efficiency of 61%, respectively. Peak self-interference cancellation (SIC) >50dB has been shown for continuous wave (CW) operation.
3D-Printed Sub-THz Chip-to-Chip Interconnect Using Planar Dielectric Image Line Technology ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748146
- Metadaten: Erschienen: 2026-10-01 · S. 549-552 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Leonhard Hahn — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Tobias Bader — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Johannes Fleischmann — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- David Panusch — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Johannes Ringel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Christian Carlowitz — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Microwave Engineering and Waveguides; 3D IC and TSV technologies; Terahertz technology and applications
- Keywords: dielectric image line; 3D printing; planar transmission lines; alumina substrate; insertion loss
- Abstract: This paper presents a fully planar sub-THz interconnect for intra-module chip-to-chip links in the 180-260 GHz frequency range. The proposed low-loss transmission channel concept was additively manufactured in dielectric image line (DIL) technology and integrated onto an alumina-based substrate (MMIC dummy). By deposition of a thin metallization layer, an efficient and planar MMIC-DIL transition is achieved with quasi-TEM to HE11mode conversion. In contrast to state-of-the-art interconnects that either rely on vertical antenna-based radiative coupling or high permittivity silicon channels, the proposed approach integrates 3D-printed polymer DILs that offer significant advantages in terms of manufacturing cost, complexity and scalability. The functional prototype that has been developed demonstrates the low-loss characteristics of the novel sub-THz channel concept. A total insertion loss of 7.8 dB was measured, of which 6.4 dB can be attributed to the two MMIC DIL transitions.
Spatial Dependent Permittivity Determination Using Complex Source Beam Focusing ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748027
- Metadaten: Erschienen: 2026-10-01 · S. 601-604 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Irwin Barengolts — Ruhr University Bochum (DE)
- Manuel Funk — Ruhr University Bochum (DE)
- Javagar Mahendran — Ruhr University Bochum (DE)
- Ali Al-Tayar — Ruhr University Bochum (DE)
- Tobias Körner — Ruhr University Bochum (DE)
- Kristof Dausien — Ruhr University Bochum (DE)
- Christian Schulz — Ruhr University Bochum (DE)
- Ilona Rolfes — Ruhr University Bochum (DE)
- Jan Barowski — Ruhr University Bochum (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Microwave Imaging and Scattering Analysis; Electromagnetic Compatibility and Measurements
- Keywords: dielectric characterization; broadband measurement; transmission coefficient; spatially resolved measurement; Gaussian beam focusing; W-band; 3D-printed polymers; polylactic acid
- Abstract: This article presents a broadband method for permittivity determination based on transmission coefficient analysis using Complex Source Beam (CSB) focusing. The CSB formulation generates a Gaussian beam-like field with a well-defined focal region in post-processing, removing the need for focusing elements. Spatially resolved transmission coefficients are obtained by laterally shifting the CSB across two different object planes. These measurements are used to determine the permittivity of the scanned materials under test. The approach enables spatially resolved dielectric characterization and supports high-resolution transmission-based material characterization. Experimental validation is performed in the W-band (75-110 GHz) using a Vector Network Analyzer (VNA) on a 3D-printed Polylactic Acid (PLA) and High Impact Polystyrene (HIPS) sample placed next to each other, yielding consistent permittivity determination.
Design of Antenna-Coupled Detector Arrays in BiCMOS for High Resolution Passive Terahertz Cameras ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748161
- Metadaten: Erschienen: 2026-10-01 · S. 97-100 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics
- Autoren:
- Martijn Hoogelander — Delft University of Technology (NL)
- T.O. Geerling — Delft University of Technology (NL)
- Nuria Llombart — Delft University of Technology (NL)
- Marco Spirito — Delft University of Technology (NL)
- C. Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Maria Alonso‐delPino — Delft University of Technology (NL)
- Topics: Superconducting and THz Device Technology; Terahertz technology and applications; Radio Frequency Integrated Circuit Design
- Keywords: BiCMOS; mutual coupling; impedance matching; array density; terahertz imaging; 130 nm CMOS; radiation pattern; responsivity
- Abstract: This paper presents a comprehensive design methodology for antenna-coupled detector arrays targeting passive terahertz (THz) cameras. The approach emphasizes the co-optimization of antenna geometry, detector interface, and array configuration to achieve both high spatial resolution and responsivity. Key design trade-offs are analyzed, in particular the impact of mutual coupling and impedance matching on the array density and on overall system performance. To address these challenges, a co-design framework based on full-wave electromagnetic simulations in CST and RF circuit simulations in ADS is employed. The proposed approach is validated on a 24-pixel prototype, operating from 200-600GHz, and implemented in a 130-nm BiCMOS process. From the radiation patterns and responsivity measurements, the camera efficiency is estimated and compared against simulations results.
Multi-Subharmonic Switching Driving for GaN Digital Class-E Doherty Power Amplifiers ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748069
- Metadaten: Erschienen: 2026-10-01 · S. 657-660 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut
- Autoren:
- Deguang Sun — Ferdinand-Braun-Institut (DE)
- Giulia Bartolotti — Politecnico di Torino (IT)
- Anna Piacibello — Politecnico di Torino (IT)
- Vittorio Camarchia — Politecnico di Torino (IT)
- Andreas Wentzel — Ferdinand-Braun-Institut (DE)
- Topics: Advanced Power Amplifier Design; GaN-based semiconductor devices and materials; PAPR reduction in OFDM
- Keywords: GaN power amplifier; pulse width modulation; low duty cycle operation; digital predistortion; amplifier efficiency; OFDM signals; LTE signals
- Abstract: The paper discusses the application of the subharmonic switching principle to pulse-width modulation-driven digital power amplifiers (PAs) to overcome the digital driving limitations of reproducing low duty-cycles at microwave frequencies, causing reduced output dynamics and system-level performance. A subharmonic switching modulator is implemented and used to characterize a GaN-based digital class-E Doherty PA for 5G FR1 n78 frequency band. The application at 3.5 GHz showed an output power range extension of 4 dB, for an overall dynamic range of 18.5 dB, from 33 dBm down to 14.5 dBm. The 1-tone characterization registered an increased power resolution in the back-off region, filling a 4 dB power gap compared to conventional fundamental-frequency operations. The system level characterization under 6.5 dB LTE and 9 dB OFDM signals demonstrated consistent average powers and high efficiency values of 57% and 51%, respectively, preserved after digital pre-distortion.
Ultra Broadband Photonic Vector Network Analyzer Demonstrating a Calibrated D-Band Measurement ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748337
- Metadaten: Erschienen: 2026-10-01 · S. 397-400 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute; Rohde & Schwarz (Germany); Toptica Photonics (Germany)
- Autoren:
- Garrit Schwanke — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Milan Deumer — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Timo B. Noack — Rohde & Schwarz (Germany) (DE)
- Thomas Puppe — Toptica Photonics (Germany) (DE)
- Sebastian Müller — Toptica Photonics (Germany) (DE)
- Albrecht Neudecker — Toptica Photonics (Germany) (DE)
- Nico Vieweg — Toptica Photonics (Germany) (DE)
- Lars Liebermeister — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Mehmet Ahad Yurtoglu — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Ramez Askar — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Michael Peter — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Taro Eichler — Rohde & Schwarz (Germany) (DE)
- Gerd Hechtfischer — Rohde & Schwarz (Germany) (DE)
- Robert B. Kohlhaas — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Topics: Advanced Photonic Communication Systems; Microwave and Dielectric Measurement Techniques; Microwave Engineering and Waveguides
- Keywords: photomixer; optical frequency synthesizer; D-band; waveguide measurement; dynamic range; millimeter-wave measurement
- Abstract: This work presents a significantly enhanced photonic measurement system for vector network analysis by combining ultra-broadband photomixers, an ultra-stable optical frequency synthesizer, and free-space to waveguide coupling. In this configuration, the system is capable of measuring across multiple waveguide bands with hertz-level resolution. To illustrate its performance, we present measurements using a WR-6 hollow rectangular waveguide and a 1 Hz bandwidth with a minimum and peak noise-limited dynamic range of 99.5 dB and 122.4 dB, respectively. Moreover, we demonstrate a calibrated measurement of a D-band bandpass filter exceeding 80 dB dynamic range, showing exceptional agreement with simulation and electronic reference measurements and thereby underscoring the potential of the photonic vector network analyzer.
A 100-Gbps D-Band Communication Link Using Polymer Microwave Fiber and eWLB-packaged SiGe BiCMOS Technology ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748127
- Metadaten: Erschienen: 2026-10-01 · S. 253-256 · OpenAlex seit 2026-11-03
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Haojie Chang — Chalmers University of Technology (SE)
- Maciej Wojnowski — Infineon Technologies (Germany) (DE)
- Sining An — Ericsson (Sweden) (SE)
- Frida Strömbeck — Chalmers University of Technology (SE)
- Yu Yan — Chalmers University of Technology (SE)
- Hartner Walter — Infineon Technologies (Germany) (DE)
- Parisa Yadranjee Aghdam — Ericsson (Sweden) (SE)
- Herbert Zirath — Chalmers University of Technology (SE)
- Topics: Microwave Engineering and Waveguides; Advanced Photonic Communication Systems; Radio Frequency Integrated Circuit Design
- Keywords: SiGe BiCMOS; embedded wafer level ball grid array; redistribution layer; monolithic microwave integrated circuits; 100 Gb/s transmission; quadrature amplitude modulation; error vector magnitude; fiber alignment
- Abstract: In this paper, a D-band communication link using polymer microwave fiber (PMF) is demonstrated. The transmitter (TX) and receiver (RX) monolithic microwave integrated circuit (MMIC) are realized in commercial 130-nm silicon germanium (SiGe) BiCMOS process and packaged in embedded wafer level ball grid array (eWLB) technology. A Vivaldi launcher is designed in eWLB high-resolution redistribution layer (RDL) for the transition between MMIC and PMF. The modules are assembled on a printed circuit board (PCB) with a manipulator for PMF alignment. Measurement results show the proposed PMF link supports 100 gigabits per second (Gbps) data rate over 1-meter PMF using 16- and 32-quadrature amplitude modulation (QAM) with error vector magnitude (EVM) of 11.9% and 8.1%, respectively.
An All-Digital Frequency-Agile RF-PWM Modulator for Software-Defined Transmitters ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748240
- Metadaten: Erschienen: 2026-10-01 · S. 977-980 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut
- Autoren:
- Deguang Sun — Ferdinand-Braun-Institut (DE)
- Andreas Wentzel — Ferdinand-Braun-Institut (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Advancements in PLL and VCO Technologies
- Keywords: software-defined radio; OFDM; adjacent channel power ratio; error vector magnitude; energy-efficient transmitter
- Abstract: This paper presents a novel frequency-agile all-digital RF pulse-width modulation (RF-PWM) modulator for software-defined radio (SDR) transmitters. A simplified two-solver digital phase interpolator enables flexible carrier generation and harmonic operation, achieving a 4× solver reduction and an estimated 75% reduction in solver-related digital power. The proposed modulator is validated with a 3.9GHz system clock and a 20MHz orthogonal frequency-division multiplexing (OFDM) signal (9dB peak-to-average power ratio, PAPR), and achieves continuous carrier tuning from 0.9GHz to 3.9GHz with adjacent-channel leakage ratio (ACLR) better than −45dBc and error vector magnitude (EVM) below −40dB. Measurements with a digital GaN power amplifier (PA) demonstrate carrier extension to 7.8GHz without increasing switching rate. Operation at 1.95GHz further enables harmonic-based carrier generation with reduced switching rate, enabling an energy-efficient and frequency-agile SDR transmitter architecture.
Interlaboratory Study of Cryogenic On-Wafer S-Parameter Measurements of CPW Microwave Devices ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748208
- Metadaten: Erschienen: 2026-10-01 · S. 109-112 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Lewis Manning — National Physical Laboratory (GB)
- Daniel Stokes — National Physical Laboratory (GB)
- Andrin Bagus — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fabian Thome — Fraunhofer Institute for Applied Solid State Physics (DE)
- Felix Heinz — Fraunhofer Institute for Applied Solid State Physics (DE)
- Francesco Fortunato — Chalmers University of Technology (SE)
- Helena Rodilla — Chalmers University of Technology (SE)
- Jan Stake — Chalmers University of Technology (SE)
- Nick Ridler — National Physical Laboratory (GB)
- Xiaobang Shang — National Physical Laboratory (GB)
- Topics: Microwave and Dielectric Measurement Techniques; Microwave Engineering and Waveguides; Quantum Information and Cryptography
- Keywords: coplanar waveguide; interlaboratory comparison; measurement reproducibility; weakly coupled resonators; transmission lines; quantum computing hardware
- Abstract: Cryogenic microwave on-wafer measurements underpin the development and validation of planar circuits used in quantum computing systems. This paper reports an interlaboratory comparison of cryogenic on-wafer S-parameter measurements performed on three coplanar waveguide (CPW) devices: a transmission line, a Beatty line, and a weakly coupled resonator. Measurements were carried out by three laboratories of the same devices on the same wafer over the frequency range 100 MHz to 14 GHz at indicated chuck temperatures below 6 K. The measured results and corresponding standard deviations are compared and discussed. The study provides useful insights into the reproducibility of cryogenic on-wafer S-parameter measurements and may serve as a reference for other laboratories developing similar capabilities.
Joint Blind Phase Calibration and Direction of Arrival Estimation Using Convex Optimization ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748197
- Metadaten: Erschienen: 2026-10-01 · S. 1176-1179 · OpenAlex seit 2026-11-03
- DE-Institutionen: NXP (Germany)
- Autoren:
- Shipeng Liu — Delft University of Technology (NL)
- Geert J. T. Leus — Delft University of Technology (NL)
- Arie G. C. Koppelaar — NXP (Germany) (DE)
- Juan Osorio — NXP (Germany) (DE)
- Kostas Doris — NXP (Germany) (DE)
- Topics: Direction-of-Arrival Estimation Techniques; Radar Systems and Signal Processing; Advanced SAR Imaging Techniques
- Keywords: direction of arrival estimation; convex optimization; hardware imperfections; angular resolution; object classification; autonomous vehicles; driver assistance systems
- Abstract: Automotive radar is an important sensor technology for self-driving cars and Advanced Driver-Assistance Systems (ADAS). Current automotive radars lack the ability to classify and categorize objects due to their limited angular resolution. A new generation of automotive radar systems, known as automotive imaging radars, proposes to overcome this limitation by using larger apertures with more antenna elements. During the radar operation, automotive imaging radar systems face challenges in the accurate estimation of the Direction-of-Arrival (DoA) due to phase incoherency in the spatially sampled information caused by hardware imperfections, temperature variations, and aging effects. This work proposes a convex optimization method to jointly calibrate the phase incoherencies and estimate the DoAs. Experimental results illustrate the effectiveness of the proposed technique, highlighting its potential in improving next-generation automotive radar systems.
A Novel Technique for Antenna Radiation Pattern Measurement With Incoherent Signal Sources ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748332
- Metadaten: Erschienen: 2026-10-01 · S. 949-952 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Sarah Klass — Hamburg University of Technology (DE)
- Bartosz Tegowski — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Electromagnetic Compatibility and Measurements; Microwave and Dielectric Measurement Techniques; Antenna Design and Analysis
- Keywords: antenna radiation pattern measurement; antenna gain; coherent sampling; intermediate frequency signal; down-conversion; local oscillator; transceiver; antenna characterization
- Abstract: This paper presents a novel technique for antenna characterization that uses two transceivers with incoherent signal sources operating at slightly distinct frequencies. Its signal-processing methods enable simultaneous determination of antenna gain and phase pattern by coherently sampling the intermediate-frequency signals, which are downconverted at both the antenna under test and the range antenna. In contrast to conventional measurement approaches, the proposed concept does not require the antennas to share a coherent local oscillator signal. The experimental validation was conducted in an anechoic chamber and demonstrates good agreement with measurements obtained by a calibrated vector network analyzer. The proposed technique offers a simple and flexible alternative for antenna measurements.
Impact of the Ambient Relative Humidity on the Relative Permittivity of PCB Substrates ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748207
- Metadaten: Erschienen: 2026-10-01 · S. 609-612 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Rasmus Mentzer — Hamburg University of Technology (DE)
- Nico Weiß — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Microwave and Dielectric Measurement Techniques; Microwave Engineering and Waveguides; Electronic Packaging and Soldering Technologies
- Keywords: relative humidity; printed circuit board substrates; dielectric constant; water diffusion; Fick's law; microstrip ring resonator; dielectric characterization
- Abstract: In this paper the impact of the ambient relative humidity on the real part of the relative permittivity of printed circuit board substrates is investigated. For this, a time-dependent permittivity model is proposed in which the diffusion of water into the substrate is considered, and the resulting change in the relative permittivity is described using Fick’s law and the Maxwell–Garnett equation. Measurements using microstrip ring resonators reveal material-dependent deviations of the relative substrate permittivity of up to 2.51%. The very good agreement between the model and the measurement data confirms the model’s capability to describe the by the ambient relative humidity induced changes in the substrate’s relative permittivity.
A Polymer Microwave Fiber Link at Y-band for Low-Cost High-Speed Communication ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748346
- Metadaten: Erschienen: 2026-10-01 · S. 261-264 · OpenAlex seit 2026-11-03
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Frida Strömbeck — Chalmers University of Technology (SE)
- Maciej Wojnowski — Infineon Technologies (Germany) (DE)
- Klaus Standner — Infineon Technologies (Germany) (DE)
- Walter Hartner — Infineon Technologies (Germany) (DE)
- Yu Yan — Chalmers University of Technology (SE)
- Herbert Zirath — Chalmers University of Technology (SE)
- Topics: Advanced Photonic Communication Systems; Radio Frequency Integrated Circuit Design; Semiconductor Lasers and Optical Devices
- Keywords: Y-band; high-speed interconnects; data center interconnects; SiGe BiCMOS; embedded wafer level ball grid array; QPSK modulation; millimeter-wave links
- Abstract: This paper presents a Y-band (170–260 GHz) Polymer Microwave Fiber (PMF) communication link designed for high data-rate, low-cost short-range interconnects. The transmitter and receiver are implemented in a commercial 90–nm SiGe BiCMOS process and packaged using embedded Wafer-Level Ball Grid Array (eWLB) technology featuring an in-package Vivaldi antenna for PMF launching. Link measurements at 234 GHz demonstrate reliable data transmission up to 60 Gbps over a 30cm PMF using QPSK modulation, achieving BER values below 10−3. The results show that silicon-based transceivers combined with eWLB packaging can deliver high-performance PMF links above 200 GHz, offering a scalable and cost-effective solution for future high-throughput data-center interconnects.
Enhanced Beam Switching with a Photonic Sub THz Transmitter for Joint Communication and Sensing ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748344
- Metadaten: Erschienen: 2026-10-01 · S. 401-404 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute
- Autoren:
- Simon Nellen — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Garrit Schwanke — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Sebastian Lauck — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Milan Deumer — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Maria Santos — Universitat Politècnica de Catalunya (ES)
- Robert B. Kohlhaas — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Topics: Advanced Photonic Communication Systems; Terahertz technology and applications; Millimeter-Wave Propagation and Modeling
- Keywords: photonic transmitter; sub-terahertz communication; integrated sensing and communication; lens geometry; antenna arrays; radiation pattern; beam overlap; directivity
- Abstract: Photonic transmitters are a promising technology for sub-terahertz (sub-THz) wireless systems, offering ultra-wide bandwidth, seamless fiber integration, and high-frequency scalability. Beyond classical data transmission, emerging applications increasingly demand spatially agile transmitters featuring dynamic beam control for joint communication and sensing. In this paper, we present a second-generation photonic switched-beam transmitter operating at sub-THz frequencies. Compared to a previously demonstrated device, the new transmitter features an improved lens geometry with higher directivity and an increased number of antenna elements arranged for denser angular sampling. Radiation pattern measurements demonstrate improved beam overlap and beam quality. Based on the previously established relationship between radiation characteristics and wireless link performance, a qualitative outlook on the expected link behavior is provided while the experimental evaluation is ongoing.
A Flipped 3D-Printed Bull’s Eye Antenna With Dielectric-Filled Metal Grooves ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748126
- Metadaten: Erschienen: 2026-10-01 · S. 717-720 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Frederike Bartels — Hamburg University of Technology (DE)
- Dominik Langer — Hamburg University of Technology (DE)
- Sarah Klass — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Antenna Design and Analysis; Advanced Antenna and Metasurface Technologies; Microwave Engineering and Waveguides
- Keywords: 3D-printed antenna; silver coating; lift-off; rectangular waveguide feed; antenna gain; millimeter-wave antennas
- Abstract: In this paper, a new flipped bull’s eye antenna concept with dielectric-filled metal grooves that utilizes the enclosure as a functional part of the antenna is presented. The antenna is composed of a 3D-printed dielectric body that is selectively silver-coated using a lift-off process, and a standard rectangular waveguide feed with a matching insert. The grooves of the bull’s eye antenna feature a novel sloped groove shape that offers more degrees of freedom for optimization. The antenna has a simulated gain of 24.3dBi and a measured gain of 22dBi at 61.25GHz.
A Compact Planar Balun for High-Power RF Push-Pull Amplifiers in MRI Transmit Chains ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748172
- Metadaten: Erschienen: 2026-10-01 · S. 1049-1052 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Ouadie Touijer — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Minh Quang Nguyen — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Niklas Schwab — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Georg Fischer — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Microwave Engineering and Waveguides; Advanced Power Amplifier Design; Electromagnetic Compatibility and Noise Suppression
- Keywords: planar balun; planar transformer; push-pull amplifier; high-power RF amplifier; impedance matching; differential-to-single-ended conversion; common-mode rejection; printed circuit boards
- Abstract: This work presents a planar transformer-based balun for magnetic resonance imaging (MRI) transmit systems at 128 MHz and 3 kW. The design uses single-turn primary and secondary coils on separate printed circuit board layers, with magnetic coupling through dielectric and air, eliminating ferromagnetic materials. A 4 : 1 impedance transformation matches a differential transistor output impedance of 6.25 Ω per drain to 50 Ω, while converting to a single-ended output. Measurements show 14.8 dB return loss, 0.3 dB insertion loss, amplitude/phase imbalance below 0.1 dB/5°, and 27.5 dB common-mode rejection. Thermal results confirm stable operation. The balun provides an efficient solution for impedance matching and differential-to-single-ended conversion in MRI transmit amplifiers.
Site-specific signal strength predictions in a TETRA communication system ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748033
- Metadaten: Erschienen: 2026-10-01 · S. 1148-1151 · OpenAlex seit 2026-11-03
- DE-Institutionen: Aschaffenburg University of Applied Sciences
- Autoren:
- M. Spahn — Aschaffenburg University of Applied Sciences (DE)
- Anne-Catherine Probst — Aschaffenburg University of Applied Sciences (DE)
- M. Wölfel — KAITEC GmbH
- F. Keil — Aschaffenburg University of Applied Sciences (DE)
- Ulrich Bochtler — Aschaffenburg University of Applied Sciences (DE)
- Topics: Millimeter-Wave Propagation and Modeling; Electromagnetic Compatibility and Measurements; Radio Wave Propagation Studies
- Keywords: terrestrial trunked radio; received signal strength prediction; ray tracing; multipath propagation; coverage prediction; material parameter calibration; differentiable optimization; spatial averaging
- Abstract: Wave propagation modeling is widely used for coverage prediction, yet accurate, site-specific urban propagation modeling remains challenging. This work applies a ray tracing model accounting for multipath propagation to estimate site-specific received signal strength (RSS) in an urban environment in the context of Terrestrial Trunked Radio. Model accuracy is assessed by comparing simulation results to real-world measurements, revealing notable deviations even under line-of-sight conditions. Uncertainties in 3D geometry and antenna positioning, together with occasional partial shadowing at receiver locations, introduce significant variations in ray contributions. This results in instability and poor reproducibility of phase-coherent RSS estimates. However, such effects are mitigated through spatial averaging by modeling a larger antenna using a grid of receiver points. Furthermore, a differentiable optimization framework is implemented to calibrate electromagnetic material parameters directly from RSS measurements. The results demonstrate slight improvement but consistent convergence in prediction error, highlighting the potential of gradient-based material parameter calibration.
Ultra-stable X-Band Photonic Microwave Source in a 3HU Rack System Achieving Mid-10 −15 Stability ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748145
- Metadaten: Erschienen: 2026-10-01 · S. 413-416 · OpenAlex seit 2026-11-03
- DE-Institutionen: Menlo Systems (Germany)
- Autoren:
- Benjamin Rauf — Menlo Systems (Germany) (DE)
- Michele Giunta — Menlo Systems (Germany) (DE)
- M. Fischer — Menlo Systems (Germany) (DE)
- Ronald Holzwarth — Menlo Systems (Germany) (DE)
- Topics: Advanced Photonic Communication Systems; Advanced Fiber Laser Technologies; Advanced Frequency and Time Standards
- Keywords: optical frequency division; optical frequency combs; phase locking; low phase noise; X-band; miniaturization; spectral purity; optical-to-electrical conversion
- Abstract: We present a compact ultra-stable microwave system source (UMS) based on optical frequency division, and constructed in a 3HU rack-mounted system. By leveraging on a femtosecond optical frequency comb phase-locked to an ultra-stable optical reference, low phase noise microwave signals are generated with ultra-high spectral purity and stability. The system integrates an optical reference, a frequency comb, with its optical-to-electrical conversion unit in a reduced size, weight, and power (SWaP) architecture. We demonstrate significant miniaturization from earlier 12HU systems while maintaining state-of-the-art performance. Experimental characterization shows strong agreement between modelled and measured phase noise contributions. The presented system represents a key step toward deployable ultra-stable microwave sources for field and space applications.
E-band Radio Link utilizing a 29 dBm GaN PA demonstrated in Field Trial ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748068
- Metadaten: Erschienen: 2026-10-01 · S. 249-252 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Mikael Hörberg — Ericsson (Sweden) (SE)
- Klas Eriksson — Ericsson (Sweden) (SE)
- Bharath Cimbili — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sining An — Ericsson (Sweden) (SE)
- Johan Karlsson — Ericsson (Sweden) (SE)
- Jonas Gustavsson — Ericsson (Sweden) (SE)
- Richard Lindman — Ericsson (Sweden) (SE)
- Torbjörn Dahl — Ericsson (Sweden) (SE)
- Konstantinos Bitsikas — Ericsson (Sweden) (SE)
- Konstantinos Kravariotis — Ericsson (Sweden) (SE)
- Mingquan Bao — Ericsson (Sweden) (SE)
- Christian Friesicke — Fraunhofer Institute for Applied Solid State Physics (DE)
- Rüdiger Quay — Fraunhofer Institute for Applied Solid State Physics (DE)
- George Skiadas — Hellenic Telecommunications Organization (Greece) (GR)
- Sam Agneessens — Ericsson (Sweden) (SE)
- … und 1 weitere
- Topics: Advanced Power Amplifier Design; GaN-based semiconductor devices and materials; Radio Frequency Integrated Circuit Design
- Keywords: E-band; field trials; high output power; QPSK; rain attenuation; link availability
- Abstract: This paper reports on a packaged gallium nitride (GaN) power amplifier (PA) verified in a radio link for E-band, 71-86GHz, achieving 29dBm in antenna port out from the radio for committed rate QPSK at 2GHz bandwidth (BW), and 24dBm for peak rate 128QAM at 2GHz BW. The corresponding data rates are 3.2Gbps and 9.6Gbps, respectively, which has been evaluated in a field trial of an 8.7km hop. This radio link has 12dB more system gain compared to a commercial reference link, that is also tested over the same hop length. The boosted link at peak rate and at committed rate corresponds to an availability of 99.8%, and 99.95%, respectively. Different fading due to selected rain events during measurement is discussed. For comparison with the packaged PA module, on-chip measurements of the GaN PA were performed with a signal bandwidth of 2GHz. The measured output powers were 33dBm and 27dBm for QPSK and 128QAM modulated signals, respectively. The PA is packaged utilizing a low-cost solution with backshort-less waveguide transitions integrated into the PCB.
Loss Analysis and Resonance Suppression in a Multigap-Waveguide Liquid Crystal Phase Shifter at Ka-Band ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748277
- Metadaten: Erschienen: 2026-10-01 · S. 13-16 · OpenAlex seit 2026-11-03
- DE-Institutionen: Technische Universität Darmstadt; Otto-von-Guericke-Universität Magdeburg
- Autoren:
- Marc Späth — Technische Universität Darmstadt (DE)
- Anagha Siby — Otto-von-Guericke-Universität Magdeburg (DE)
- Robin Neuder — Technische Universität Darmstadt (DE)
- Martin Schüßler — Technische Universität Darmstadt (DE)
- Holger Maune — Technische Universität Darmstadt (DE)
- Alejandro Jimenez Saez — Technische Universität Darmstadt (DE)
- Topics: Microwave Engineering and Waveguides; Microwave and Dielectric Measurement Techniques; Liquid Crystal Research Advancements
- Keywords: liquid crystal phase shifter; Ka-band; loss analysis; resonance suppression; cavity sealing; figure of merit; differential phase shift; Rogers substrate
- Abstract: This paper presents a loss analysis of a Ka-band multigap-waveguide (MGWG) liquid-crystal (LC) phase shifter based on a progressive build-up from the Rogers substrate configuration to the empty Rexolite cavity, the sealed cavity, and the final LC-filled device. The measurements show that the empty Rexolite cavity has only a minor impact, whereas sealing of the cavity adds about 0.3dB of additional loss. In addition, a flipped Rexolite taper, a 3mm wide LC cavity, and a pinless octagon flange are introduced. The resulting design suppresses flange-related resonances and achieves the highest and most stable figure of merit (FoM) among the investigated MGWG implementations, with a peak value of 126°/dB. At 30GHz, a differential phase shift of 273° and a FoM of 117°/dB are obtained.
Dual-Polarized Dynamic Metasurface Antenna Based on Degenerate Modes ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748119
- Metadaten: Erschienen: 2026-10-01 · S. 761-764 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute; Technische Universität Berlin
- Autoren:
- Vitor Almeida — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Ramez Askar — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Michael Peter — Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute (DE)
- Wilhelm Keusgen — Technische Universität Berlin (DE)
- Topics: Advanced Antenna and Metasurface Technologies; Antenna Design and Analysis; Metamaterials and Metasurfaces Applications
- Keywords: dynamic metasurface antennas; dual polarization; beam steering; cross-polarization discrimination; integrated sensing and communication
- Abstract: This paper presents a dual-polarized, linear dynamic metasurface antenna (DMA) at 15 GHz featuring two independently controllable beams in a shared aperture. The architecture utilizes a dielectric-loaded rectangular waveguide supporting degenerate orthogonal transverse electric modes to create two isolated channels for orthogonal linear polarizations. The DMA consists of a linear array of varactor-loaded crossed-slot unit cells, enabling electronic tuning of polarizability for beam steering. A binary amplitude control scheme is implemented to achieve beamforming while minimizing hardware complexity. Full-wave simulations demonstrate cross-polarization discrimination (XPD) exceeding 34 dB and inter-channel isolation better than 58 dB, with beam steering from -30° to +30°, validating the design for in-band full-duplex links and integrated sensing and communication (ISAC) systems.
Characterization of a 300 GHz Monopulse Multimode Antenna for THz-Link Alignment ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748224
- Metadaten: Erschienen: 2026-10-01 · S. 933-936 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Radiometer (Germany)
- Autoren:
- Mark Johannes Neff — University of Stuttgart (DE)
- Maximilian Heckele — University of Stuttgart (DE)
- Simon Haußmann — University of Stuttgart (DE)
- Keizo Inagaki — National Institute of Information and Communications Technology (JP)
- Hugh J. Gibson — GMD EURL
- R. Henneberger — Radiometer (Germany) (DE)
- Arata Ogaki — Waseda University (JP)
- Shintaro Hisatake — Gifu University (JP)
- Tetsuya Kawanishi — Waseda University (JP)
- Ingmar Kallfass — University of Stuttgart (DE)
- Topics: Antenna Design and Analysis; Millimeter-Wave Propagation and Modeling; Microwave Engineering and Waveguides
- Keywords: monopulse antenna; multimode antenna; H-band; 300 GHz; terahertz communication; beam tracking; beam alignment; antenna gain
- Abstract: We present the characterization of a compact H-band monopulse multimode antenna developed for beam tracking in high-data-rate THz wireless communication. Antenna measurements in an anechoic chamber verify the beam pattern of the higher mode used for RF beam tracking and show the influence of the excitation polarization on the measured pattern of the monopulse antenna. Measurements of the antenna show a peak gain of 15.4 dB and 15.7 dB at ±8° off-axis from boresight and demonstrate a deep in-axis null with a maximum 41.3 dB null depth. Measurements confirm a 26 GHz 3-dB-bandwidth from 282 GHz to 308 GHz.
All-Electronic 240 Gbps Over-the-Air Communication Link Demonstration at 300 GHz ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748323
- Metadaten: Erschienen: 2026-10-01 · S. 837-840 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Benjamin Schoch — University of Stuttgart (DE)
- Simon Haußmann — University of Stuttgart (DE)
- Lukas Gebert — University of Stuttgart (DE)
- Aleksey Dyskin — Nvidia (United Kingdom) (GB); Nvidia (United States) (US)
- Elad Mentovich — Nvidia (United Kingdom) (GB); Nvidia (United States) (US)
- A. Tessmann — Fraunhofer Institute for Applied Solid State Physics (DE)
- Jean-Pierre Teyssier — Keysight Technologies (Singapore) (SG); Keysight Technologies (United States) (US); Keysight Technologies (Austria) (AT); Keysight Technologies (United Kingdom) (GB)
- Ingmar Kallfass — University of Stuttgart (DE)
- Topics: Millimeter-Wave Propagation and Modeling; Advanced Photonic Communication Systems; Terahertz technology and applications
- Keywords: 300 GHz; millimeter wave; terahertz communication; coherent optical transmission; 16-QAM; 1024-QAM; 256-QAM; error vector magnitude
- Abstract: The demonstration of a millimeter wave over-the-air data transmission at 312.5 GHz RF center frequency is presented. Active electronic transmit and receive analog frontend modules are utilized to achieve a maximum data rate of 240 Gbps over a distance of 4.6 m using a coherent VNA-AWG test-bed. Modulation formats from 16-QAM to 1024-QAM are successfully employed with the optimal configuration (256-QAM, 30 GBd), yielding an occupied bandwidth of 40.5 GHz and a measured error-vector magnitude of 2.25%. These results establish a new performance benchmark for electronic THz links and provide a validated technology platform for future sub-THz communication systems.
An Embedded Microwave Structure for Scalable Trapped Ion Quantum Computing ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748129
- Metadaten: Erschienen: 2026-10-01 · S. 117-120 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Georg Frederik Riemschneider — Hamburg University of Technology (DE)
- Nico Weiß — Hamburg University of Technology (DE)
- Marvin Jaeger — Hamburg University of Technology (DE)
- Omar Jabi — Hamburg University of Technology (DE)
- Cheng Yang — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Quantum Information and Cryptography; Quantum Computing Algorithms and Architecture; Mechanical and Optical Resonators
- Keywords: trapped-ion quantum computing; microwave coupling; quantum charge-coupled device; surface-electrode ion trap; crosstalk; ion shuttling; scalable quantum architecture
- Abstract: This paper presents a microwave structure for local microwave coupling in trapped ion quantum computing. The structure is suitable for the scalable architecture of a quantum charge-coupled device (QCCD). It can be embedded into a surface ion trap chip utilizing a multi-layer stack for vertical integration. The microwave structure does not disturb the surface electrodes for ion trapping and ion shuttling to adjacent trapping zones. An internal line resonator increases the coupling efficiency. A chip-scale design shows a simulated crosstalk of -50dB in a QCCD-similar configuration. This is demonstrated by fabrication and measurement of an up-scaled PCB demonstrator.
Robust Long-Term Duplex Operation of a Wireless Network-Integrated Terahertz Outdoor Testbed ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748060
- Metadaten: Erschienen: 2026-10-01 · S. 257-260 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Fraunhofer Institute for Applied Solid State Physics; Radiometer (Germany); Karlsruhe Institute of Technology
- Autoren:
- Simon Haußmann — University of Stuttgart (DE)
- Lukas Gebert — University of Stuttgart (DE)
- A. Tessmann — Fraunhofer Institute for Applied Solid State Physics (DE)
- R. Henneberger — Radiometer (Germany) (DE)
- Thomas Zwick — Karlsruhe Institute of Technology (DE)
- Ingmar Kallfass — University of Stuttgart (DE)
- Topics: Millimeter-Wave Propagation and Modeling; Terahertz technology and applications; Optical Wireless Communication Technologies
- Keywords: terahertz communication; long-term field deployment; link stability
- Abstract: In this work we present the system setup and long-term operation of a 300-GHz point-to-point fixed wireless communication system with network-integrated connectivity. The full-duplex outdoor system, consisting of custom active Terahertz radio front-ends, parabolic antennas with adaptive gain functionality and commercial millimeter-wave modems, covers a distance over 100 meters from rooftop to rooftop. The link is operated continuously in a central European climate without interruption over a period of three months from November until January. Correlation with weather data shows the impact of weather events on the data rate of the link. The experiments show that even under adverse conditions like fog, rain, snow or wind, the link is still maintained without interruption, documenting the long-term stability and robustness of Terahertz communication.
50-W GaN-on-Si Doherty Power Amplifier at 7GHz ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748268
- Metadaten: Erschienen: 2026-10-01 · S. 441-444 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg; Infineon Technologies (Germany)
- Autoren:
- Alexander Deublein — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Christian Musolff — Infineon Technologies (Germany) (DE)
- Michael Loose — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- David Riess — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Aldo Ruggiu — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Jan-Felix Etzel — Nokia (Finland) (FI)
- Robert Weigel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Georg Fischer — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Advanced Power Amplifier Design; GaN-based semiconductor devices and materials; Silicon Carbide Semiconductor Technologies
- Keywords: GaN-on-Si; Doherty power amplifier; 7 GHz; high power amplifier; gallium nitride
Multi-Loop YTO Contolling for Wideband and Agile Frequency Synthesizer ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748255
- Metadaten: Erschienen: 2026-10-01 · S. 897-900 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Lukas Polzin — Ruhr University Bochum (DE)
- Nils Pohl — Ruhr University Bochum (DE)
- Thomas Musch — Ruhr University Bochum (DE)
- Marcel van Delden — Ruhr University Bochum (DE)
- Topics: Advancements in PLL and VCO Technologies; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: frequency synthesizer; wideband frequency tuning; phase noise reduction; temperature drift compensation; magnetic field control
- Abstract: This paper presents a multi-loop phase-locked loop architecture for the control of an yttrium iron garnet tuned oscillator (YTO), targeting low phase noise, a wide tuning range, and fast dynamic frequency modulation despite the large magnetic inductance. The oscillation frequency of the YTO is proportional to the applied magnetic field, which requires high coil currents that typically degrade system performance. To overcome the fundamental trade-off between tuning range and control speed, three complementary control paths are employed. A wideband path for phase-noise suppression, a slower path compensating static and slow frequency errors such as temperature drifts, and a digital-to-analog converter controlled path enabling agile frequency modulation and the generation of frequency chirps. The implemented system achieves a tuning range of 5 GHz with a settling time below 25 µs, demonstrating that the classical trade-off between tuning range and dynamic performance can be effectively mitigated.
Polydopamine-Assisted Tollens Metallization for 3D-Printed Microwave Components ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748218
- Metadaten: Erschienen: 2026-10-01 · S. 277-280 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Dominik Langer — Hamburg University of Technology (DE)
- Frederike Bartels — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Electrodeposition and Electroless Coatings; Nanomaterials and Printing Technologies; Electronic Packaging and Soldering Technologies
- Keywords: polydopamine; silver plating; 3D printing; microwave components; surface functionalization; adhesion; electrical conductivity; millimeter-wave attenuation
- Abstract: This work replaces tin(II) chloride (SnCl2) sensitization in conventional Tollens metallization with polydopamine (PDA) surface functionalization. In a full-factorial study, the reactivity of Tollens’ reagent and the functionalization route were varied systematically. The best-performing PDA-based treatment improved adhesion, increased the silver layer thickness by 30.0% to 164.2nm, and increased the electrical conductivity by 23.9% to 28.5MS/m compared with SnCl2sensitization. After three deposition cycles, the WR-15 waveguide achieved 7dB/m attenuation at 65GHz, demonstrating the applicability of the process to additively manufactured microwave components.
Tunable Waveguide Bragg Filter using Liquid Crystal Filled Unit Cells ⚑ DE
- DOI: 10.23919/eumc69230.2026.11748082
- Metadaten: Erschienen: 2026-10-01 · S. 1005-1008 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Tobias Bader — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Simon Pietschmann — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Gerald Gold — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Metamaterials and Metasurfaces Applications; Microwave Engineering and Waveguides; Advanced Antenna and Metasurface Technologies
- Keywords: liquid crystals; unit cell; additive manufacturing; crossed molecular beams; waveguide filters; switchable filter; anisotropic materials
- Abstract: In this work, a periodic structure is realized using additive manufacturing, where one part of the unit cell is filled with an anisotropic liquid crystal material. The remaining part consists of a lattice of crossed beams, which is treated as an effective medium composed of air and printable dielectric. This homogenization enables the analysis of the structure using a one-dimensional eigenvalue formulation and significantly reduces the computational effort within a full-wave simulation. Based on this approach, a tunable Bragg-type filter is designed, fabricated, and experimentally characterized in a standard waveguide environment. Despite practical design constraints and necessary modifications to the initial concept, the results demonstrate that the proposed method enables the realization of switchable filter characteristics using only a conventional waveguide.
European Microwave Integrated Circuits Conference (EuMIC) — 28 neu · conference
A Broadband Antenna-Coupled Terahertz Power Detector in a 12 nm FinFET CMOS Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748489
- Metadaten: Erschienen: 2026-10-01 · S. 325-328 · OpenAlex seit 2026-09-26
- DE-Institutionen: University of Wuppertal
- Autoren:
- Hamadi Sadkaoui — University of Wuppertal (DE)
- Marcel Andree — University of Wuppertal (DE)
- Tasnim Ben Mansour — University of Wuppertal (DE)
- Ullrich R. Pfeiffer — University of Wuppertal (DE)
- Topics: Terahertz technology and applications; Radio Frequency Integrated Circuit Design; Superconducting and THz Device Technology
- Keywords: silicon lens; FinFET; common-gate configuration; wideband antenna; broadband impedance matching; responsivity; noise equivalent power
- Abstract: This paper presents an antenna-integrated, silicon-lens-coupled THz direct detector implemented in a novel 12LP FinFET technology. The detector core consists of a differentially driven Super-Low Threshold Voltage (SLVT) FinFET pair operating in a common-gate configuration and co-designed with a broadband antenna. The antenna spans multiple BEOL metal layers and provides an inductive impedance profile for broadband detector matching and high responsivity. The detector is coupled to a 9 mm hyper-hemispherical silicon lens and characterized in a free-space setup using frequency extender modules covering 325–500 GHz. The detector supports voltage-mode readout and both biased and zero-drain-bias operation. A maximum responsivity of 360 V/W is achieved at a gate bias of 160 mV, while a minimum NEP of 18 pW/$\sqrt {{\text{Hz}}} $ is measured at 406 GHz for a gate bias of 220 mV.
A Compact D-Band GaN LNA MMIC for Monolithic Transceiver Integration ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748441
- Metadaten: Erschienen: 2026-10-01 · S. 345-348 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Thomas Zieciak — Fraunhofer Institute for Applied Solid State Physics (DE)
- Philipp Neininger — Fraunhofer Institute for Applied Solid State Physics (DE)
- Christian Friesicke — Fraunhofer Institute for Applied Solid State Physics (DE)
- Peter Brückner — Fraunhofer Institute for Applied Solid State Physics (DE)
- Rüdiger Quay — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; GaN-based semiconductor devices and materials; Advanced Power Amplifier Design
- Keywords: D-band; monolithic microwave integrated circuits; GaN HEMT; noise figure; millimeter-wave transceivers
- Abstract: This work presents a 6-stage D-Band gallium nitride (GaN) low-noise amplifier (LNA) monolithic microwave integrated circuit (MMIC), designed for monolithic integration into a transceiver MMIC. The LNA benefits from the excellent low-noise properties of Fraunhofer IAF’s GaN high-electron-mobility transistor (HEMT) technology GaN10-20 and a space-efficient layout, comprising a compact, low-loss inter-stage matching network (ISMN) topology. As a result, the LNA’s noise figure (NF) reaches a minimum value of 3.1 dB, an average value of 3.64 dB between 120 and 150 GHz, and a miniaturized core area of 0.425 mm2. To the best of the authors’ knowledge, this NF sets a new record among GaN-based LNAs operating at D-Band frequencies. Furthermore, it is believed that among comparably performing GaN LNAs, this design has the smallest core area. Consequently, this design enables new possibilities for compact transceivers and presents a compelling choice for next-generation communication systems.
A 300-GHz SiGe Radar: Comparison of Frontside and Backside Radiation Enabling up to 100 GHz Tuning Range ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748452
- Metadaten: Erschienen: 2026-10-01 · S. 141-144 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques; Ruhr University Bochum; Infineon Technologies (Germany)
- Autoren:
- Benedikt Sievert — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Christian Bredendiek — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Till Ziegler-Bellenberg — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Olga Krylova — Ruhr University Bochum (DE)
- Andrii Berdnykov — Ruhr University Bochum (DE)
- Dominic A. Funke — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Klaus Aufinger — Infineon Technologies (Germany) (DE)
- Nils Pohl — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jan Wessel — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Radio Frequency Integrated Circuit Design; Radar Systems and Signal Processing; Advancements in PLL and VCO Technologies
- Keywords: FMCW radar; SiGe BiCMOS; MMIC; wideband VCO; frequency quadrupler; microstrip patch antenna; bow-tie antenna; on-chip antenna
- Abstract: This paper presents two FMCW radar MMICs fabricated in Infineon’s SiGe BiCMOS B12HFC technology, featuring wideband VCOs with tuning ranges up to 92GHz and 100GHz around center frequencies of 287.5GHz and 293.5GHz, respectively. Both MMICs integrate a wideband VCO, a frequency-quadrupler chain, a receive mixer, and differential on-chip antennas; they differ in the choice of antennas. These are realized either as frontside-radiating microstrip patch antennas or as backside-radiating bowtie antennas. To increase the antenna directivity for industrial sensing scenarios, the patch-based MMIC is combined with an elliptical dielectric lens, while the bowtie-based MMIC is mounted on an aspherical silicon lens. While the backside-radiating system offers superior raw resolution (2mm) at the cost of integration complexity, the frontside-radiating system achieves comparable performance after calibration.
A 10 W, 4–20 GHz SPDT Switch Using Stacked Transistors in a 100-nm GaN-on-SiC Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748438
- Metadaten: Erschienen: 2026-10-01 · S. 205-208 · OpenAlex seit 2026-11-03
- DE-Institutionen: Hensoldt (Germany)
- Autoren:
- Dominik Wrana — Hensoldt (Germany) (DE)
- Kristina Widmer — Hensoldt (Germany) (DE)
- Ralf Rieger — Hensoldt (Germany) (DE)
- Patrick Schuh — Hensoldt (Germany) (DE)
- Ralf Leberer — Hensoldt (Germany) (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; GaN-based semiconductor devices and materials
- Keywords: SPDT switch; stacked transistors; GaN-on-SiC; insertion loss; isolation; linearity; power handling; compression point
- Abstract: This paper presents a reflective-type wideband single-pole double-throw switch, implemented in a 100-nm GaN-on-SiC semiconductor technology. The design achieves a relative bandwidth of more than 130%, spanning over the frequency range from 4 to 20GHz. The measured ON-state insertion loss varies between 1.2dB and 1.7dB, the OFF-state isolation is better than 35dB. Stacked transistors are used for the series and shunt switch elements to enhance the linearity of the SPDT. The input-related P0.1dB compression point is measured above 34dBm over the entire frequency range. The input-related P1dB compression point is simulated to exceed 40dBm, thus offering power handling capabilities of the switch beyond 10W.
Extended W-band Low-Noise Amplifiers in 35-nm Metamorphic High-Electron-Mobility Transistor Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748409
- Metadaten: Erschienen: 2026-10-01 · S. 341-344 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Felix Heinz — Fraunhofer Institute for Applied Solid State Physics (DE)
- Arnulf Leuther — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fabian Thome — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advanced Power Amplifier Design
- Keywords: W-band; low noise amplifier; metamorphic high electron mobility transistor; noise figure; noise temperature; input matching; interstage matching; microstrip line
- Abstract: This paper reports on the design and measurement of extended W-band (75–110GHz) low-noise amplifier (LNAs) monolithic microwave integrated circuits (MMICs) in 35nm metamorphic high-electron-mobility-transistor (mHEMT) technology for radiometric applications. Three MMIC versions have been designed to evaluate how the noise figure can be significantly reduced by the use of elevated grounded co-planar waveguide structures. LNA1 relies only on thin-film microstrip lines and achieves an average noise temperature of 195K with 34.6dB of gain between 70–115GHz. LNA2 utilizes an elevated GCPW input matching to improve the average noise temperature to 159K with 34.5dB of gain. LNA3 bases on elevated GCPW structures in the input and first interstage matching to demonstrate 137K of average noise temperature (1.7dB noise figure) with 33.2dB gain. To the best of the authors’ knowledge, LNA3 provides the lowest noise among W-band amplifiers at room temperature reported in the literature.
Highly Efficient Transmit Octupler in a 130nm SiGe Technology for the Whole D-Band ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748412
- Metadaten: Erschienen: 2026-10-01 · S. 373-376 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques; Ruhr University Bochum
- Autoren:
- Christian Bredendiek — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jan Schöpfel — Ruhr University Bochum (DE)
- Dominic A. Funke — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jan Wessel — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advanced Power Amplifier Design; Advancements in PLL and VCO Technologies
- Keywords: D-band; MMIC; frequency multiplier chain; active balun; HBT; medium power amplifier; SiGe BiCMOS
- Abstract: This paper presents a wideband multiplier chain MMIC as a transmitter for the D-band. The on-chip architecture of the MMIC is a fully differential topology. The MMIC is fabricated in IHP’s BiCMOS technology SG13G2Cu which offers HBTs with a fTof 350GHz and fmaxof 450GHz. The single-ended LO input signal at Ku-band is transformed into a differential signal by an active balun. The frequency translation from Ku-band into D-band is realized by three cascaded bootstrapped Gilbert-cell doublers with additional amplifiers and a medium power amplifier (MPA) at the output. In the intended application the chip achieves a peak output power of 9.5dBm over a 3-dB bandwidth of about 45GHz. The quiescent current of the MMIC is 65mA from a single 3.3V supply.
A 58-GHz Dual-Modulus 2/3 TSPC Frequency Divider in 22-nm FDSOI CMOS with Body-Bias Tuning ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748422
- Metadaten: Erschienen: 2026-10-01 · S. 25-28 · OpenAlex seit 2026-11-03
- DE-Institutionen: Technische Universität Braunschweig
- Autoren:
- Tetiana Oleksiivna Baluta — Technische Universität Braunschweig (DE)
- Yerzhan Kudabay — Technische Universität Braunschweig (DE)
- Вадим Іссаков — Technische Universität Braunschweig (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advancements in PLL and VCO Technologies; Analog and Mixed-Signal Circuit Design
- Keywords: true single-phase clock; FD-SOI CMOS; millimeter-wave circuits; low-power clock generation; self-resonant frequency; 22nm CMOS
- Abstract: This work presents the first dual-modulus 2/3 true-single-phase-clock (TSPC) frequency divider implemented in 22nm FDSOI CMOS technology operating up to 58GHz. The presented divider maintains robust divide-by-2 and divide-by-3 operation over an input frequency range from 8GHz to 58GHz. The design exploits wide-range body-bias tuning, allowing body voltages up to ±2V to shift the self-resonance frequency and extend the operating range without additional circuit complexity. The divider consumes a maximum of 3.5mW from a 0.9V supply at the highest operating frequency. The active TSPC core occupies only 28 μm×16 μm, while the complete chip including pads measures 460 μm×580 μm. The presented design demonstrates that 22-nm FDSOI TSPC architectures can achieve millimeter-wave dual-modulus operation with low power consumption through architectural optimization and body-bias-assisted tuning.
A Compact 114–146 GHz 2-Stacked Power Amplifier Achieving 14.9 dBm Output Power in 28 nm CMOS ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748401
- Metadaten: Erschienen: 2026-10-01 · S. 261-264 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Tianzhu Huang — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Alexander Schönecker — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Kai Scheller — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Albert-Marcel Schrotz — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Robert Weigel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Analog and Mixed-Signal Circuit Design
- Keywords: 28nm CMOS; integrated sensing and communication; interstage matching; transformer matching; power-added efficiency; millimeter-wave amplifier
- Abstract: This paper presents an area-efficient D-band CMOS power amplifier (PA) targeting joint communication and sensing (JCAS) applications. The proposed PA employs a three-stage architecture consisting of a pseudo-differential common-source driver followed by two differential 2-stacked amplifier stages. Transformers are utilized to achieve wideband interstage matching while maintaining compact chip area. A folded differential shunt inductor structure is adopted to reduce passive loss and improve stacking efficiency. Fabricated in a 28 nm CMOS technology, the PA achieves a small-signal gain of 26.6 dB with a 3-dB bandwidth from 114 to 146 GHz. The maximum output power reaches 14.9 dBm with a peak power-added efficiency (PAE) of 14.8% while occupying a compact core area of 0.046 mm2. The proposed design realizes a competitive combination of bandwidth, output power, efficiency and chip area among reported D-band CMOS PAs.
A Novel Fully Open-Source RFIC Design Flow for Ultra-Broadband and Low-Noise mmWave TIAs ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748507
- Metadaten: Erschienen: 2026-10-01 · S. 185-188 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut; Leibniz Institute for High Performance Microelectronics
- Autoren:
- Sultan Mohammad Ikram — Neural Semiconductor Limited
- Rupok Das — Neural Semiconductor Limited
- Md. Shafin Hossain — Neural Semiconductor Limited
- Atif Ali — Neural Semiconductor Limited
- Tanjil M. Shivan — Ferdinand-Braun-Institut (DE)
- Farabi Ibne Jamal — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Analog and Mixed-Signal Circuit Design
- Keywords: transimpedance amplifier; millimeter-wave circuits; open-source design tools; SiGe BiCMOS; low noise amplifier; input-referred noise; OpenEMS; Ngspice
- Abstract: This paper presents two types of mmWave transimpedance amplifiers (TIAs) — a low-noise and an ultra-broadband design — implemented entirely using open-source tools in the 130 nm SiGe BiCMOS IHP Open-PDK. The design flow employs Qucs-S for schematic entry, Ngspice for simulation, KLayout for layout, and openEMS for EM co-simulation without proprietary tools. The flow supports high-frequency RFIC simulation, enabling S-parameter, transient, and input-referred noise analysis. Two low-noise TIAs achieve a minimum average input-referred noise of $9;{\text{pA}}/\sqrt {{\text{Hz}}}$ and a maximum bandwidth of 97 GHz. The broadband TIAs exhibit bandwidths exceeding 130 GHz with 42–43 dBΩ transimpedance gain. A π-model extraction method is used to overcome the lack of transient SnP support in Ngspice. To the best of authors’ knowledge, the TIAs are among the first RF/mmWave designs with such performance realized entirely using open-source tools. The results validate the feasibility of RFIC design in open-source tools.
Zero-IF Capable Single-Balanced HEMT Mixers with 2±2dB Conversion Loss from 110 to 220GHz ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748407
- Metadaten: Erschienen: 2026-10-01 · S. 317-320 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Patrick Umbach — Fraunhofer Institute for Applied Solid State Physics (DE)
- Eric Sigle — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fabian Thome — Fraunhofer Institute for Applied Solid State Physics (DE)
- Arnulf Leuther — Fraunhofer Institute for Applied Solid State Physics (DE)
- Rüdiger Quay — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advanced Power Amplifier Design
- Keywords: direct conversion receiver; single-balanced mixer; up-converter; MMIC; conversion loss; 64-QAM; error vector magnitude; high data rate communication
- Abstract: This paper reports on the design and evaluation of two upconverter monolithic microwave integrated circuits (MMICs) for use in high data rate communication links. For this application, uniform frequency responses and high linearity are fundamental. The presented circuits cover IF and RF bandwidths of more than 20 and 100 GHz, respectively, while maintaining a conversion gain (CG) flatness of ±2 dB. Both mixer cores have freely definable drain and source potentials, enabling a direct connection to the IF gain stage. Conveniently, the latter implements an unbalanced-to-balanced signal conversion. As a result, the IF response is not limited by any decoupling elements and puts minimum requirements on off-chip components. Because continuous wave (CW) measurements provide only limited insight into nonlinear distortion characteristics, a data transmission experiment constitutes a major part of this work. For a 64-QAM, 24Gb/s waveform, the error-vector-magnitude (EVM) has been evaluated with two different setups: A traditional modulation-demodulation approach and an innovative vector component analyzer (VCA) technique.
Fully Integrated 250−310 GHz Transmitter and Receiver in an Advanced SiGe BiCMOS Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748377
- Metadaten: Erschienen: 2026-10-01 · S. 281-284 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Universität Ulm
- Autoren:
- Ahmed Gadallah — Leibniz Institute for High Performance Microelectronics (DE)
- Mesut İnaç — Leibniz Institute for High Performance Microelectronics (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Dietmar Kissinger — Universität Ulm (DE)
- Mohamed Hussein Eissa — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Superconducting and THz Device Technology; Advancements in PLL and VCO Technologies
- Keywords: SiGe BiCMOS; 130 nm technology; broadband amplification; conversion gain; noise figure
- Abstract: This paper presents fully integrated sub-THz transmitter (Tx) and receiver (Rx) realized in an advanced 130 nm SiGe BiCMOS technology. Both the Tx and Rx follow a direct-conversion architecture supported by a ×8 LO chain and wideband amplification stages. The Tx achieves a conversion gain of 34 dB with a maximum saturated output power of 12 dBm. The Rx reports a maximum conversion gain of 45 dB with tuning range of 40 dB and a minimum double-sideband noise figure of 13 dB. With wideband operation from 250−310 GHz, the presented Tx and Rx are well suited for IEEE 802.15.3d sub-THz wireless applications.
0-110-GHz Characterization and Scalable Modeling of Integrated Thin-Film Resistors in RF Silicon Interposer Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748483
- Metadaten: Erschienen: 2026-10-01 · S. 357-360 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics
- Autoren:
- Melik Yazıcı — Leibniz Institute for High Performance Microelectronics (DE)
- Falk Korndorfer — Leibniz Institute for High Performance Microelectronics (DE)
- Dirk J. Hagen — Leibniz Institute for High Performance Microelectronics (DE)
- Dirk Wolansky — Leibniz Institute for High Performance Microelectronics (DE)
- Yegappan Sethu — Leibniz Institute for High Performance Microelectronics (DE)
- Mauricio Montanares — Leibniz Institute for High Performance Microelectronics (DE)
- Farabi Ibne Jamal — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: 3D IC and TSV technologies; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: thin film resistors; titanium nitride; parasitic reactance; W-band; Verilog-A modeling; de-embedding
- Abstract: This paper presents the broadband characterization of Thin-Film Resistors (TFRs) embedded in an RF silicon interposer for mm-Wave heterogeneous integration. On-wafer S-parameters measured up to 110 GHz evaluate the high-frequency stability and parasitic effects of the Titanium Nitride (TiN) films. To facilitate RFIC design, a geometry-scalable lumped-element π-network model is developed. Intrinsic sheet resistance and parasitic reactances are extracted from de-embedded measurements, demonstrating highly stable, non-dispersive behavior deep into the W-band. These parameters are seamlessly integrated into a Verilog-A module. The model’s predictive accuracy is validated against unseen intermediate geometries, showing an excellent correlation with the measured data. Ultimately, this work provides designers with a reliable, ready-to-use tool for wideband systems on RF silicon interposers.
A Compact Band-Selectable Bi-Directional Coupler With an Integrated Wi-Fi Filter in RF SOI CMOS ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748414
- Metadaten: Erschienen: 2026-10-01 · S. 233-236 · OpenAlex seit 2026-11-03
- DE-Institutionen: Technical University of Munich; Infineon Technologies (Germany)
- Autoren:
- Ting-Li Hsu — Technical University of Munich (DE)
- Valentyn Solomko — Infineon Technologies (Germany) (DE)
- Amelie Hagelauer — Technical University of Munich (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Analog and Mixed-Signal Circuit Design
- Keywords: bidirectional coupler; band-stop filter; DPDT switch; insertion loss; coupling coefficient; directivity; interference suppression; 5 GHz band
- Abstract: In this paper, a compact integrated reconfigurable bi-directional coupler is presented. With the area-efficient switchable coupler design, the excessive insertion loss at high frequency caused by the high-pass characteristic of the electrically short coupler is suppressed. A double pole double throw (DPDT) direction switch is added to enable bi-directionality. To inhibit the interference from the Wi-Fi signal transmitted by the same mobile device, a band-stop Wi-Fi filter is integrated. The device is implemented in a 90 nm RF SOI CMOS technology. The coupling coefficient maintains between 22 dB and 25 dB with a directivity better than 18 dB from 950 MHz to 3 GHz for both forward and reverse coupling mode. The insertion loss at 3 GHz is improved by 0.08 dB with the band-selectable design. Wi-Fi signal coupling is suppressed to be lower than -22.5 dB at frequencies between 5.1 GHz and 5.9 GHz.
An Open-Source Design Flow for Sub-THz RFICs: 207 GHz Low Noise Amplifier and 180 GHz Power Amplifier ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748403
- Metadaten: Erschienen: 2026-10-01 · S. 181-184 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ferdinand-Braun-Institut; Leibniz Institute for High Performance Microelectronics
- Autoren:
- Atif Ali — Neural Semiconductor Limited
- Md. Shafin Hossain — Neural Semiconductor Limited
- Rupok Das — Neural Semiconductor Limited
- Sultan Mohammad Ikram — Neural Semiconductor Limited
- Tanjil M. Shivan — Ferdinand-Braun-Institut (DE)
- Farabi Ibne Jamal — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advanced Power Amplifier Design; Microwave Engineering and Waveguides
- Keywords: low noise amplifier; power amplifier; stacked power amplifier; Wilkinson power combiner; noise figure; matching network design; device characterization; 180 GHz
- Abstract: This work presents a complete open-source design and verification flow using the IHP SG13G2 PDK for sub-THz RFICs. A 207 GHz Low-Noise Amplifier (LNA) achieving a noise figure (NF) of 8.2 dB and a 180 GHz stacked Power Amplifier (PA) delivering a saturated output power of 18.9 dBm have been demonstrated. In addition, a Wilkinson power combiner has been designed within the same framework. The proposed approach addresses key limitations of open-source tools by introducing alternative methodologies for device characterization, matching-network design, and performance analysis. The designs have been benchmarked against prior works, showing performance comparable to state-of-the-art implementations. These results validate that competitive sub-THz RFIC performance can be achieved using a fully open-source design flow without reliance on proprietary tools.
A D-Band SiGe Power Amplifier with a Coupled Line-Based Four-Way Power Combiner ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748402
- Metadaten: Erschienen: 2026-10-01 · S. 57-60 · OpenAlex seit 2026-11-03
- DE-Institutionen: Karlsruhe Institute of Technology
- Autoren:
- İbrahim Kağan Aksoyak — Texas Instruments (United States) (US)
- Henning Poensgen — Karlsruhe Institute of Technology (DE)
- Ahmet Çağrı Ulusoy — Karlsruhe Institute of Technology (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: SiGe BiCMOS; high electron mobility transistors; power-added efficiency; output power; millimeter-wave amplifier; power divider; driver stage
- Abstract: This paper presents a D-band power amplifier (PA) utilizing a novel four-way coupled-line power combining architecture. The design is implemented in a 130-nm SiGe BiCMOS process with high-performance HBTs featuring transit frequency (fT) of 470 GHz and maximum oscillation frequency (fmax) of 650 GHz. The system integrates a driver stage, power divider, four parallel output amplifiers, and a coupled-line combiner within a compact 1.4 mm2footprint. A standalone unit PA is fabricated for benchmarking, achieving saturated output power (Psat) of 18.8 dBm, an output-referred 1-dB compression point (OP1dB) of 17.7 dBm, and maximum power-added efficiency (PAE) of 20% at 136 GHz. The four-way PA demonstrates improved performance with Psatof 23.7 dBm, OP1dBof 19.1 dBm, and maximum PAE of 16.6% at 136 GHz. Both PAs demonstrate state-of-the-art performance, representing significant advancement in high-frequency SiGe PA design.
Modified Complementary Ring Mixer Driven by a Single-Ended LO with 48 dB LO-RF Isolation in 22-nm FD-SOI CMOS ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748383
- Metadaten: Erschienen: 2026-10-01 · S. 313-316 · OpenAlex seit 2026-11-03
- DE-Institutionen: RWTH Aachen University
- Autoren:
- Adrian Arnold — RWTH Aachen University (DE)
- Muh‐Dey Wei — RWTH Aachen University (DE)
- Renato Negra — RWTH Aachen University (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advancements in PLL and VCO Technologies
- Keywords: up-conversion mixer; LO-RF isolation; K-band; conversion gain; 1 dB compression point
- Abstract: This paper presents a modified complementary up-conversion ring mixer for K-band applications. The use of complementary switches allows the mixer to be driven by a single-ended Local-Oscillator (LO). The proposed switching core features p-type transistors that are mirrored and sized relatively to the n-type transistors, leading to better symmetry in the parasitic capacitances of the devices and improved LO-RF isolation. A prototype is implemented, operating from 24 GHz to 30 GHz, that achieves a conversion gain (CG) of -4.9 dB, LO-RF isolation of 48 dB, and output 1-dB compression point (OP1dB) of -11 dBm for an LO power of 3 dBm.
A 220 to 330 GHz Dual-IF Receiver-Chip in 35-nm mHEMT Technology ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748481
- Metadaten: Erschienen: 2026-10-01 · S. 285-288 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Rainer Weber — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fabian Thome — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sandrine Comparsi WAGNER — Fraunhofer Institute for Applied Solid State Physics (DE)
- A. Tessmann — Fraunhofer Institute for Applied Solid State Physics (DE)
- Arnulf Leuther — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advanced Photonic Communication Systems
- Keywords: MMIC; subharmonic mixer; low noise amplifier; frequency quadrupler; traveling-wave amplifier; E-band; receiver noise figure; millimeter-wave communication
- Abstract: This paper presents a monolithic dual-IF H-band receiver MMIC in 35 nm InGaAs/InAlAs mHEMT technology for wireless communications from 220 to 330 GHz. The chip integrates a low noise amplifier, a frequency quadrupler with a traveling-wave amplifier (TWA) buffer, and subharmonic dual-IF mixers with two selectable IF outputs: baseband in IQ (0–40 GHz) and E-band (70–90 GHz). Measurements show conversion gain from −1.5 to 5.5 dB and an estimated receiver noise figure of 6.7 dB (baseband) and 6.6–7.9 dB (E-band), respectively. The combination of on-chip LO generation and subharmonic mixing reduce external LO frequency to about RF/8, while the dual-IF architecture supports both wideband DSP systems and E-band transport modems. The compact implementation enables high data rate short range links and scalable backhaul applications.
120-/160-GHz High-Dynamic-Range Power Detectors in 130-nm SiGe BiCMOS ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748399
- Metadaten: Erschienen: 2026-10-01 · S. 321-324 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Technische Universität Berlin
- Autoren:
- Arda Özdemir — Massachusetts Institute of Technology (US)
- Volkan Ertürk — Leibniz Institute for High Performance Microelectronics (DE)
- Seyyid M. Dilek — Leibniz Institute for High Performance Microelectronics (DE)
- Asif Ali Mir — Leibniz Institute for High Performance Microelectronics (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Corrado Carta — Technische Universität Berlin (DE)
- Topics: Radio Frequency Integrated Circuit Design; Analog and Mixed-Signal Circuit Design; Superconducting and THz Device Technology
- Keywords: power detector; D-band; SiGe BiCMOS; noise equivalent power; on-chip monitoring; passive imaging; millimeter-wave receivers
- Abstract: This work presents two D-band (110–170 GHz) high-dynamic-range (DR) power detectors (PDs) in IHP 130-nm SiGe BiCMOS, targeting both passive imaging and on-chip monitoring. The single-ended common-emitter PDs, centered at 120GHz and 160GHz, employ a reference branch for common-mode DC offset cancellation, along with optimized biasing, device sizing, core layout, and broadband input matching. The 120-GHz PD achieves 50kV/W peak responsivity, $4.3{\text{pW}}/\sqrt {{\text{Hz}}}$ minimum noise-equivalent power (NEP), 40dB DR, and 33.3% fractional bandwidth within a 0.096mm2core area, while the 160-GHz PD achieves 44kV/W peak responsivity, $5.2{\text{pW}}/\sqrt {{\text{Hz}}}$ minimum NEP, 42dB DR, and 28.6% fractional bandwidth within a 0.064mm2core area, both consuming 1mW from a 1.8V supply. The proposed PD designs achieve the highest reported DRs in D-band and support multi-purpose operation, with potential for hardware sharing in future integrated sensing and communication (ISAC) front ends.
D-Band Phase Shifter Using a Modified Translinear Loop for Linearized Gain and Phase Control ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748385
- Metadaten: Erschienen: 2026-10-01 · S. 109-112 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Stefan Schönhärl — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Albert-Marcel Schrotz — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Manuel Koch — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Sascha Breun — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Robert Weigel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advancements in PLL and VCO Technologies; Analog and Mixed-Signal Circuit Design
- Keywords: phase shifters; D-band; translinear loop; phase control; phased arrays; SiGe BiCMOS; millimeter wave; error vector magnitude
- Abstract: This paper reports a vector modulator phase shifter (VMPS) designed for D-band (110GHz–170GHz) phased-array applications. The VMPS is digitally controlled and utilizes a modified translinear loop (TLL) to linearize magnitude and phase control. The VMPS is implemented in a 90nm SiGe BiCMOS process with ft/fmaxof 300GHz/500GHz respectively. A 3 dB bandwidth of more than 50 GHz and across D-band an error vector magnitude (EVM) of less than 1.4dB (with an RMS magnitude error below 1dB and RMS Phase Error below 6.5°) is achieved.
Scalable Small-Signal Modeling of 20-nm InGaAs HEMTs Using a DC-Biased Backside Field Plate ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748492
- Metadaten: Erschienen: 2026-10-01 · S. 9-12 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Maxime Moulin — Fraunhofer Institute for Applied Solid State Physics (DE)
- Sayed Ali Albahrani — Fraunhofer Institute for Applied Solid State Physics (DE)
- Felix Heinz — Fraunhofer Institute for Applied Solid State Physics (DE)
- Meike Schauerte — Fraunhofer Institute for Applied Solid State Physics (DE)
- Arnulf Leuther — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advancements in Semiconductor Devices and Circuit Design; GaN-based semiconductor devices and materials
- Keywords: InGaAs HEMT; DC biasing; breakdown voltage; millimeter-wave power amplifier; low noise amplifier; S-parameters; wafer bonding; electron beam lithography
- Abstract: We present a scalable small-signal model for III–V HEMTs featuring a DC-biased nanostructured backside field plate and an extended gate–drain recess to enhance breakdown voltage and enable higher millimeter-wave output power. The model extends a classical Common-Source shell topology by adding intrinsic elements that capture the capacitances and leakage paths between the backside field plate, the channel, the gate, and the drain, enabling accurate prediction of the associated small-signal behavior. The framework is experimentally validated using InGaAs HEMTs with a 20-nm gate length on 100-mm silicon substrates, where the backside field plate is implemented locally beneath the center of the gate–drain access region via wafer bonding and electron-beam lithography. The model describes unit gate widths from 5 μm to 30 μm, including 2- and 4-finger configurations. Bias-dependent parameters (as functions of IDS, VDS, and VBS) are extracted and verified over a wide operating range. The model consistently reproduces measured S-parameters from 1 GHz to 225 GHz under low-noise and power-amplifier bias conditions. The proposed approach provides a physically meaningful, scalable compact model that captures the impact of an advanced localized nanostructured DC-biased backside field plate.
A QFN-packaged 6.4–8.4 GHz SiGe BiCMOS PA for 5G-Adv/6G with 30dBm P SAT and 37.5% PAE ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748410
- Metadaten: Erschienen: 2026-10-01 · S. 145-148 · OpenAlex seit 2026-11-03
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Davide Pecile — University of Padua (IT)
- Alberto Gambarucci — Infineon Technologies (Germany) (DE)
- Stefan Kokorovic — Infineon Technologies (Germany) (DE)
- Luigi Marzocchella — Infineon Technologies (Germany) (DE)
- Andrea Bevilacqua — University of Padua (IT)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Analog and Mixed-Signal Circuit Design
- Keywords: power amplifier; SiGe BiCMOS; QFN package; 5G-Advanced; 6G; power-added efficiency; differential amplifier; ACLR
- Abstract: This paper presents a watt-level two-stage differential power amplifier (PA) implemented in a 130nm SiGe BiCMOS technology and embedded in a 3 × 3mm2bondwire-connected QFN package. The PA targets the 6.4–8.4GHz band for 5G-Advanced (5G-Adv) and early sixth-generation (6G) deployment, delivering a measured saturated output power (PSAT) up to 30dBm with a peak power-added efficiency (PAE) of 37.5%. A package-aware design methodology is introduced and experimentally validated to assess the impact of package limitations in the FR3 frequency band. The proposed approach improves package isolation and suppresses out-of-band gain, resulting in enhanced stability compared to a reference design. Tested with a 100MHz 5G NR-FR1 signal, the PA achieves 64-QAM EVM compliance (8%) up to an average output power (PAVG) of 22dBm with a measured PAEAVGof approximately 15%. An ACLR of −33dBc is obtained at an average output power of 20dBm, while an ACLR floor of about −50dBc is measured at 6GHz.
A Fully Integrated Dual-Band Transmitter MMIC for 60/120 GHz FMCW Radar ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748439
- Metadaten: Erschienen: 2026-10-01 · S. 137-140 · OpenAlex seit 2026-11-03
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Darina Abdyusheva — Ruhr University Bochum (DE)
- Maximilian Schröder — Ruhr University Bochum (DE)
- Bent Walther — Ruhr University Bochum (DE)
- Thomas Musch — Ruhr University Bochum (DE)
- Marcel van Delden — Ruhr University Bochum (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advancements in PLL and VCO Technologies; Radar Systems and Signal Processing
- Keywords: dual-band transmitter; MMIC; FMCW radar; 60 GHz; 120 GHz; ultra-wideband; phase-locked loop; millimeter-wave integrated circuits
- Abstract: This paper presents a dual-band transmitter monolithic microwave integrated circuit (MMIC) for frequency-modulated continuous-wave (FMCW) radar applications, operating at 60 GHz and 120 GHz. The design enables ultra-wideband performance with bandwidths of 20 GHz and 40 GHz in the respective bands. A compact and switchable frequency synthesis architecture is presented, achieving full integration of a 60 GHz phase-locked loop, a 60 GHz output amplifier, and a 120 GHz Gilbert cell doubler on one MMIC. This implementation represents a first for the field and is essential for the advancement of future FMCW imaging systems. Measurement results demonstrate consistent and stable operation across both bands, with an output power of 8.1 dBm at 60 GHz and 4.5 dBm at 120 GHz and exhibits minimal variation in output power across the entire frequency range.
A 32 GHz Analog PLL with the Second Harmonic Extraction at 64 GHz for 6G Applications in 22FDX ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748518
- Metadaten: Erschienen: 2026-10-01 · S. 29-32 · OpenAlex seit 2026-11-03
- DE-Institutionen: Technische Universität Braunschweig
- Autoren:
- Meghana Kadam — Technische Universität Braunschweig (DE)
- Yazan Saad Aldine — Technische Universität Braunschweig (DE)
- Вадим Іссаков — Technische Universität Braunschweig (DE)
- Topics: Advancements in PLL and VCO Technologies; Radio Frequency Integrated Circuit Design; Analog and Mixed-Signal Circuit Design
- Keywords: phase-locked loop; charge pump; local oscillator generation; 6G; phase noise; millimeter-wave integrated circuits
- Abstract: We present the design and measurement results of a charge pump (CP) based phase-locked loop (PLL) designed in 22 nm FDSOI (fully depleted silicon on insulator) CMOS for the local oscillator (LO) signal generation in D-band (110 GHz to 170 GHz) transceivers in 6G applications. The system is designed for a fundamental output frequency of 32 GHz and achieves stable locking behavior with a phase noise of -84.6 dBc/Hz at 1 MHz carrier offset. It uses a reference frequency of 32 MHz. The total DC power consumption is 46.4 mW. We also extract the second harmonic at a frequency around 64 GHz. The measured fundamental and second harmonic output power for a 50 Ω load is about -8 dBm and -16.2 dBm, respectively. The reference spur at 32 MHz offset from the fundamental signal is measured to be -45.6 dB. The core chip area, excluding the pads, is 0.49 mm2. The proposed third-order PLL architecture is a good compromise between necessary performance and architecture simplicity.
A Q-band Analog Linearizer MMIC with Independent Third-Order Intermodulation Control and Tunable Delay Elements ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748462
- Metadaten: Erschienen: 2026-10-01 · S. 333-336 · OpenAlex seit 2026-11-03
- DE-Institutionen: University of Stuttgart; Tesat-Spacecom (Germany)
- Autoren:
- Burak Güven Özat — University of Stuttgart (DE)
- Mathias Pius Scharpf — University of Stuttgart (DE)
- Marc Günter — University of Stuttgart (DE)
- Mark Johannes Neff — University of Stuttgart (DE)
- Benjamin Schoch — University of Stuttgart (DE)
- Stefan Koch — Tesat-Spacecom (Germany) (DE)
- Ingmar Kallfass — University of Stuttgart (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: analog predistortion; linearizer; Q-band; third-order intermodulation; millimeter-wave MMIC; adaptive linearization; satellite communication
- Abstract: This paper presents a Q-band analog predistortion monolithic millimeter-wave integrated circuit in 130 nm SiGe HBT BiCMOS technology for satellite communication applications. The circuit employs separate linear and nonlinear branches, enabling independent control of the third-order intermodulation (IM3) output power, phase, and effective group delay. A tunable phase equalizer in the nonlinear branch provides approximately 23 ps of adjustable differential group-delay range between the fundamental and IM3 paths over the 37.5 – 42.5 GHz band. The fabricated chip achieves a small-signal system gain of approximately 23 dB with input and output return losses better than 10 dB. Two-tone measurements demonstrate continuous tuning of the IM3 output power over a range exceeding 40 dB and a full 360° IM3 phase-tuning capability around 40 GHz. These results verify independent control of IM3 magnitude, phase, and group delay, providing the key degrees of freedom required for adaptive analog linearization. Wideband modulated-signal validation is reserved for future work.
A W-Band Frequency Tripler in 130 nm BiCMOS with a Novel Fundamental Rejection Technique ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748386
- Metadaten: Erschienen: 2026-10-01 · S. 213-216 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Chiara Kohl — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Manuel Koch — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Martin Grund — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Kai Scheller — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Radio Frequency Integrated Circuit Design; Advancements in PLL and VCO Technologies; Microwave Engineering and Waveguides
- Keywords: fundamental frequency suppression; BiCMOS; 130 nm CMOS; 180° phase shift; low power consumption
- Abstract: This paper presents the design of an integrated differential W-band frequency tripler demonstrating high suppression of the fundamental frequency. The tripler is implemented using a harmonic-balanced frequency tripler (HBFT) architecture in the 130 nm SG13G2 BiCMOS process by IHP. The high level of fundamental suppression is achieved by a parallel circuit configuration of an amplifier showing the same structure but in a more linear operating point. A phase shift of 180° in the subsequent recombination between the two parallel signal paths leads to a strong cancellation of the fundamental frequency at the output, resulting in a measured suppression of 54 dB. The tripler achieves peak performance at an input power level of 2 dBm and exhibits a 3 dB bandwidth of 19 %, covering an output frequency range from 84 GHz to 102 GHz. The total active chip area is 0.025 mm2, and the DC power consumption amounts to 43.7 mW at 2 V supply voltage.
D-Band SiGe-Based GCPW PA with Transformer Balun Achieving 2.51% EVM under 128-QAM ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748486
- Metadaten: Erschienen: 2026-10-01 · S. 253-256 · OpenAlex seit 2026-11-03
- DE-Institutionen: Leibniz Institute for High Performance Microelectronics; Rohde & Schwarz (Germany)
- Autoren:
- Luis Aruquipa Callata — Leibniz Institute for High Performance Microelectronics (DE)
- Aniello Franzese — Leibniz Institute for High Performance Microelectronics (DE)
- Volkan Ertürk — Leibniz Institute for High Performance Microelectronics (DE)
- Seyyid M. Dilek — Leibniz Institute for High Performance Microelectronics (DE)
- Sandro Wenzel — Rohde & Schwarz (Germany) (DE)
- Oliver Voß — Rohde & Schwarz (Germany) (DE)
- Batuhan Sütbaş — Leibniz Institute for High Performance Microelectronics (DE)
- Corrado Carta — Leibniz Institute for High Performance Microelectronics (DE)
- Topics: Advanced Power Amplifier Design; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: SiGe BiCMOS; grounded coplanar waveguide; transformer balun; matching networks; load-pull simulation; output matching network; 128-QAM; error vector magnitude
- Abstract: This paper presents a D-band power amplifier (PA) implemented in an advanced 130-nm SiGe BiCMOS process. To ensure low-loss optimal power transfer, the interstage matching network is realized using grounded coplanar waveguide (GCPW) lines in a T-configuration considering impedances given by load- and source-pull simulations. The output matching network is designed by accurately modeling a transformer balun to match the single-ended output directly to the optimal load-pull impedance, incorporating the pad. Thanks to the careful design and use of GCPW lines, measured and simulated results are in good agreement with a peak power-added efficiency of 13.2%, a power gain above 20 dB in 110–140 GHz, and a saturated output power more than 14.5 dBm at 130 GHz. Moreover, two-tone and modulated-signal measurements, including 16-, 64-, and 128-QAM, are presented, validating the PA linearity. To the best knowledge of the authors, the measured EVM below 2.6% is the lowest reported for silicon PAs above 110 GHz.
Extended D-Band Frequency Quadrupler based on Harmonic Source- and Load-Pull Measurements ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748408
- Metadaten: Erschienen: 2026-10-01 · S. 221-224 · OpenAlex seit 2026-11-03
- DE-Institutionen: Fraunhofer Institute for Applied Solid State Physics
- Autoren:
- Eric Sigle — Fraunhofer Institute for Applied Solid State Physics (DE)
- Fabian Thome — Fraunhofer Institute for Applied Solid State Physics (DE)
- Arnulf Leuther — Fraunhofer Institute for Applied Solid State Physics (DE)
- Rüdiger Quay — Fraunhofer Institute for Applied Solid State Physics (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advanced Power Amplifier Design
- Keywords: frequency quadrupler; D-band; harmonic suppression; load-pull measurement; wideband radar; bandpass filter; output bandwidth; impedance matching
- Abstract: This paper presents a frequency quadrupler achieving extended D-Band (110–170GHz) bandwidth with high harmonic suppression for high-resolution wideband radar applications. It uses two balanced frequency doubler stages to realize the multiplication factor. Harmonic source- and load-pull measurements are used for transistor size selection and performance optimization, in order to achieve a trade-off between the measured optimum impedance targets for high output power of the wanted harmonic, while allowing for high suppression of unwanted harmonics. A following band-pass filter further reduces any higher-order out-of-band harmonics. The circuit achieves a measured total 3-dB output bandwidth of 99 – 170 GHz with a suppression of at least 26.0 dBc up to the 6th harmonic. Within D-Band, a suppression of over 30.3 dBc across all in-band harmonics is measured.
A Framework for Millimeter-Wave Matching-Network Synthesis using Compact Passive Modules and Topology Augmentation ⚑ DE
- DOI: 10.23919/eumic69231.2026.11748459
- Metadaten: Erschienen: 2026-10-01 · S. 105-108 · OpenAlex seit 2026-11-03
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Dingan Wang — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Manuel Koch — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Robert Weigel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Norman Franchi — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides; Advanced Power Amplifier Design
- Keywords: millimeter wave; on-chip transformer; differential transmission lines; metal-insulator-metal capacitors; design space exploration; SiGe BiCMOS; D-band; broadband impedance matching
- Abstract: A framework for millimeter-wave (mm-wave) matching-network synthesis is presented. Three compact passive modules, namely an on-chip transformer (OT), a differential transmission line (DTL), and a MIM capacitor (MIMCAP), provide broadband responses over 80–200GHz as functions of geometric parameters, enabling design-space exploration without repeated electromagnetic (EM) simulations. The framework also supports automated topology exploration. As a demonstration, the framework is applied to the wideband input matching of a driver-stage power amplifier in Infineon’s B12HFC 90nm SiGe BiCMOS technology across D-band (110–170GHz). Starting from a transformer-only baseline, the framework extends the exploration to augmented matching networks and their parameter spaces, revealing the trade-offs between matching bandwidth and additional insertion loss across and within different topologies. The proposed framework therefore provides a practical basis for systematic topology and parameter exploration by decoupling repeated EM simulation from the iterative design loop.
European Radar Conference (EuRAD) — 41 neu · conference
Attitude and Rotational Ego-motion estimation for Air Taxis Using Automotive MIMO Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747300
- Metadaten: Erschienen: 2026-10-01 · S. 141-144 · OpenAlex seit 2026-11-04
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Vignesh Gopalan — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jeyaraman — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Gunnar Briese — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Patrick Wallrath — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Inertial Sensor and Navigation; Radar Systems and Signal Processing; Robotics and Sensor-Based Localization
- Keywords: attitude estimation; air taxis; forward-looking radar; integration drift; roll and pitch estimation; ground reflection; extended Kalman filter; UAV navigation
- Abstract: Air taxis operating at low altitudes require accurate attitude estimation for safe navigation and enhanced perception. Radar based ego-motion estimation, although well established for ground vehicles, faces challenges in aerial platforms due to additional degrees of freedom and coupled translation-rotation dynamics. We propose a radar-only framework using a forward-looking automotive MIMO radar to address these challenges. Rotational ego-velocities are estimated from point cloud displacements after translational ego-motion compensation. To mitigate integration drift, roll and pitch are derived from ground reflections and fused with rotational ego velocities using an Extended Kalman Filter (EKF), yielding consistent attitude estimates. Experimental validation using the Continental ARS548 radar on an UAV demonstrates enhanced accuracy with average RMSEs of 1.2426° in roll, 1.0331° in pitch, and 2.7592° in yaw.
Utilizing Non-Line-of-Sight Radar Features for Process Condition Characterization in Forging ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747380
- Metadaten: Erschienen: 2026-10-01 · S. 545-548 · OpenAlex seit 2026-11-04
- DE-Institutionen: Brandenburg University of Technology Cottbus-Senftenberg
- Autoren:
- Yuyao Jiang — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Artem Alimov — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Sebastian Härtel — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Markus Gardill — Brandenburg University of Technology Cottbus-Senftenberg (DE)
- Topics: Radar Systems and Signal Processing; Microwave and Dielectric Measurement Techniques; Non-Destructive Testing Techniques
- Keywords: multipath propagation; difference maps; linear discriminant analysis; defect detection
- Abstract: This study investigates the use of radar sensing in a forging environment for process monitoring. Classical statistical analysis methods combined with linear discriminant analysis (LDA) are applied to demonstrate that non-line-of-sight (NLoS) components of radar data contain informative features related to defect formation during underfill. Representative time-beat-frequency (TBF) signatures and difference maps are then constructed to analyze variations between forging conditions. The results show that multipath differences are mainly concentrated in beat-frequencies within $~\pm 200 \mathrm{kHz}$. Features extracted from these significant beat frequencies are subsequently projected using LDA, where the three forging conditions are clearly separable.
Motion-Adaptive 360° Multi-Radar Imaging Using Self-Sustained Doppler Beam Sharpening ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747225
- Metadaten: Erschienen: 2026-10-01 · S. 65-68 · OpenAlex seit 2026-11-04
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Max Heidbrink — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Marc Reinecke — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Oliver Sura — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Advanced SAR Imaging Techniques; Radar Systems and Signal Processing; Direction-of-Arrival Estimation Techniques
- Keywords: Doppler beam sharpening; synthetic aperture; angular resolution; autonomous driving
- Abstract: The trend toward autonomous driving increases the demand for radar-based high-resolution environmental perception in vehicles. This paper presents a multi-radar approach for high-resolution 360° imaging around a vehicle. To improve angular resolution over conventional MIMO imaging, a self-sustained radar ego-motion estimation technique is applied to enable Doppler beam sharpening (DBS) without assisting sensors. To account for the motion-dependent synthetic aperture and resolution changes, the DBS resolution gain is calculated dynamically for each radar sensor and azimuth angle. This enables motion-adaptive enhanced imaging by combining conventional MIMO angle estimation and DBS in a multi-radar setup. The approach is evaluated using real-world data from a test vehicle, demonstrating powerful 360° environmental perception.
Detector-less Coherent Integration-based Doppler Division MIMO Decoder ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747138
- Metadaten: Erschienen: 2026-10-01 · S. 301-304 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Filip Rosu — NXP (Germany) (DE)
- Adriana Brigalda — NXP (Germany) (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Advanced Wireless Communication Techniques
- Keywords: MIMO radar; constant false alarm rate detection; false alarm probability; coherent integration; automotive radar
- Abstract: This paper presents a new approach of decoding the signal received from a MIMO radar using Doppler Division Multiplexing. The proposed method addresses three major challenges faced by current state-of-the-art DD-MIMO decoders. The first is developing a high dimensional Constant False Alarm Rate Detector that is suitable for variable noise distributions (thermal noise, MIMO spurs, and phase noise may dominate alternatively depending on scene). The second is providing an embedded radar SoC friendly detection/decoding implementation while optimizing SNR. The proposed method does not require a threshold-based CFAR detector to identify potential targets, and most importantly it can provide an analytical false-alarm probability $\left(\boldsymbol{P}_{\boldsymbol{F} \boldsymbol{A}}\right)$ independent of the underlying noise distribution. Moreover, the method is designed to work with coherent integration among RX channels which is becoming a highly desirable processing step in next-generation automotive radar to improve system sensitivity.
Heartbeat Detection using CW Radar on the Edge ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747858
- Metadaten: Erschienen: 2026-10-01 · S. 593-596 · OpenAlex seit 2026-11-04
- DE-Institutionen: Infineon Technologies (Germany); Hamburg University of Technology
- Autoren:
- Jakob Strutz — Infineon Technologies (Germany) (DE)
- Kay Bierzynski — Infineon Technologies (Germany) (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Non-Invasive Vital Sign Monitoring; ECG Monitoring and Analysis; Heart Rate Variability and Autonomic Control
- Keywords: heartbeat detection; continuous wave radar; non-contact vital sign monitoring; edge computing; MobileNet; short-time Fourier transform; heart rate estimation; lightweight neural networks
- Abstract: Contactless and non-intrusive monitoring of vital signs is a key component of modern healthcare, offering new possibilities for patient comfort and convenience. Although traditional medical devices like ECG and PPG provide highly accurate heart rate measurements, they come with notable drawbacks, such as discomfort for patients, particularly during long-term monitoring in settings like sleep laboratories. In this paper, we present a machine learning-based approach for accurately detecting heartbeats using short-time Fourier transforms and the lightweight MobileNet architecture. Deploying the machine learning model on edge devices offers several advantages, including reduced latency, enhanced data privacy, and lower power consumption. The proposed algorithm was trained on a publicly available dataset, and it demonstrates high accuracy while maintaining a small model size and low inference time.
Realistic Ray-Tracing-Based Simulation of Wave Propagation Through Dielectrics for Subsurface Radar Imaging Applications ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747718
- Metadaten: Erschienen: 2026-10-01 · S. 381-384 · OpenAlex seit 2026-11-04
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg; Rohde & Schwarz (Germany)
- Autoren:
- Peter Mergenthaler — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Ingrid Ullmann — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Christian Schüßler — fiveD GmbH
- Johanna Bräunig — fiveD GmbH
- Konstantin Root — Rohde & Schwarz (Germany) (DE)
- Georg Schnattinger — Rohde & Schwarz (Germany) (DE)
- Marcel Hoffmann — fiveD GmbH
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Microwave Imaging and Scattering Analysis; Geophysical Methods and Applications; Synthetic Aperture Radar (SAR) Applications and Techniques
- Keywords: ray tracing; subsurface radar imaging; dielectric layer; wave propagation simulation; time-of-flight; reflection and transmission; dielectric multilayers; lossy dielectric materials
- Abstract: The development and evaluation of subsurface radar imaging systems and reconstruction methods require realistic simulation of wave propagation through dielectric layers, as otherwise severe image artifacts may occur. Since full-wave simulation is computationally expensive for electrically large scenes, ray-tracing-based simulation is a promising alternative, but its validity must be demonstrated. In this work we investigate whether a ray-tracing-based framework reproduces the dominant propagation effects caused by dielectric layers by analytical and experimental validation. First, the time-of-flight of the reflection paths and the transmission of layered dielectric setups are validated against analytical predictions. Then, the simulator is tested in a more complex scenario with a Siemens star behind a dielectric stack and compared to measured data. The results show that realistic simulation requires not only ideal dielectric models, but also the inclusion of non-ideal, lossy materials.
Measurement Uncertainty in Vital Sign Detection with Frequency-Comb Continuous-Wave Radar on Unmanned Aerial Vehicles ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747894
- Metadaten: Erschienen: 2026-10-01 · S. 285-288 · OpenAlex seit 2026-11-04
- DE-Institutionen: University of Freiburg; Fraunhofer Institute for Physical Measurement Techniques
- Autoren:
- Dominik M. Spale — University of Freiburg (DE)
- Gunnar Gidion — University of Freiburg (DE)
- Eric Maier — Fraunhofer Institute for Physical Measurement Techniques (DE)
- Katrin Schmitt — Fraunhofer Institute for Physical Measurement Techniques (DE)
- Stefan J. Rupitsch — University of Freiburg (DE)
- Topics: Non-Invasive Vital Sign Monitoring; Radar Systems and Signal Processing; Advanced SAR Imaging Techniques
- Keywords: vital sign detection; unmanned aerial vehicles; measurement uncertainty; respiratory monitoring; frequency estimation; time-frequency analysis; search and rescue
- Abstract: Radar-based vital sign detection enables contactless respiration monitoring and is a promising approach for search-and-rescue operations. Although radar self-motion artifacts are known to significantly degrade detection performance, the associated uncertainty characteristics under UAV deployment remain insufficiently understood. In this contribution, measurements using a frequency-comb continuous-wave radar and a mechanically actuated breathing dummy are conducted to evaluate frequency estimation under varying conditions, including obstructions and UAV motion. Respiration frequency is estimated using spectral and time-frequency methods, and uncertainty is quantified within a variance-based framework. Results show accurate estimation under stationary or line-of-sight conditions, whereas uncompensated UAV motion and radar-target distance increase uncertainty and reduce spectral peak stability, establishing a baseline for evaluating motion compensation strategies.
Electromagnetically Informed DoA Resolution Analysis of Bumper-Integrated 77 GHz Automotive MIMO Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747187
- Metadaten: Erschienen: 2026-10-01 · S. 305-308 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Adrian Lamoral Coines — Delft University of Technology (NL)
- Nikita Petrov — NXP (Germany) (DE)
- R. Z. Syeda — NXP (Germany) (DE)
- Alexander Georgievic Yarovoy — Delft University of Technology (NL)
- Yanki Aslan — Delft University of Technology (NL)
- Topics: Direction-of-Arrival Estimation Techniques; Radar Systems and Signal Processing; Advanced SAR Imaging Techniques
- Keywords: 77 GHz; embedded element patterns; beamforming; microstrip antenna array
- Abstract: Painted plastic bumpers can perturb the array manifold of automotive MIMO radars and degrade direction-of-arrival estimation. This paper evaluates these effects for a 77 GHz 2TX-4RX patch array by embedding full-wave simulated complex-valued embedded element patterns into a narrow-band virtual-array model and processing with a conventional beamformer. Two-target probability of resolution is analyzed versus central angle and target separation for varied bumper-aperture standoffs. The results show that bumper presence and its standoff distance reshape the resolvable angular region, contracting it from about ± 30° to ± 20° at the larger standoff, and introduce asymmetric level curves that shift the required two-target separation by up to about 1° at central angle of -10°. These findings identify bumper standoff as a first-order integration parameter for robust angular discrimination in automotive radar.
Point-to-Point: Optimizing Radar Models via Attribute-Sensitive Metrics to Bridge the Reality Gap ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747515
- Metadaten: Erschienen: 2026-10-01 · S. 89-92 · OpenAlex seit 2026-11-04
- DE-Institutionen: RWTH Aachen University; TU Dortmund University
- Autoren:
- Markus Schmidt — HELLA GmbH & Co. KGaA
- Agnes Widera — RWTH Aachen University (DE)
- Sarah Neugebauer — HELLA GmbH & Co. KGaA
- Moritz Kahlert — HELLA GmbH & Co. KGaA
- Claas Tebruegge — HELLA GmbH & Co. KGaA
- Torsten Bertram — TU Dortmund University (DE)
- Topics: Radar Systems and Signal Processing; Autonomous Vehicle Technology and Safety; Advanced SAR Imaging Techniques
- Keywords: radar point clouds; sim-to-real gap; driver assistance systems; Wasserstein distance; Chamfer distance; spatiotemporal synchronization; autonomous driving safety; Wilcoxon signed-rank test
- Abstract: High-fidelity RADAR models are essential for validating advanced driver assistance system (ADAS) functions. This paper presents a methodological pipeline for the quantitative validation of n-dimensional RADAR point clouds (PCs) to mitigate the simulation-to-reality gap in software-in-the-loop (SiL) environments. Addressing the stochastic nature of sensor data, attribute-sensitive metrics like Wasserstein Distance (WD) enable objective sequence comparison beyond purely geometric measures such as Chamfer Distance (CD). Spatio-temporal synchronization and systematic parameter optimization significantly enhance the agreement between synthetic and empirical data. Statistical methods, including the Wilcoxon Signed-Rank Test (WST), evaluate these results and quantify confidence levels. The findings establish a scalable methodology for benchmarking digital twins, ensuring compliance with rigorous safety standards for automated driving.
Synthetic Automotive Radar Point Cloud Generation using a Conditional Variational Autoencoder ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747441
- Metadaten: Erschienen: 2026-10-01 · S. 21-24 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Ankush Roy — Delft University of Technology (NL)
- Justin Dauwels — Delft University of Technology (NL)
- Francesco Fioranelli — Delft University of Technology (NL)
- Geethu Joseph — Delft University of Technology (NL)
- Ashish Pandharipande — NXP (Germany) (DE)
- Topics: Advanced SAR Imaging Techniques; Radar Systems and Signal Processing; Advanced Neural Network Applications
- Keywords: automotive radar; conditional variational autoencoder; annotation cost reduction
- Abstract: We investigate synthetic automotive radar data generation to reduce the cost and effort to acquire and annotate large-scale real-world data for learning-based perception. Existing approaches are often constrained to specific environments or require multi-sensor supervision. To address these limitations, we propose a generative model for automotive radar point-cloud synthesis that learns from real-world data and enables scene generation based on user-defined class-wise object counts. Specifically, we introduce a conditional variational autoencoder (RadarVAE) to jointly generate radar point cloud coordinates and per-point semantic labels, conditioned on a given classwise instance-count vector. Evaluations on the RadarScenes public dataset show that RadarVAE achieves higher distributional similarity to real data than baseline methods, while enabling controllable scene composition. Moreover, object-level statistics from clustering-based bounding boxes show strong agreement with real data patterns.
Bumper Reflection Mitigation for Automotive Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747162
- Metadaten: Erschienen: 2026-10-01 · S. 33-36 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Filip Rosu — NXP (Germany) (DE)
- Gabriela Enescu — NXP (Germany) (DE)
- Andrei Anghel — NXP (Germany) (DE)
- Silviu Ciochină — NXP (Germany) (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Autonomous Vehicle Technology and Safety
- Keywords: automotive radar; condensation; parking assistance; ADAS
- Abstract: Blockage is a serious issue affecting the performance of the safety features of ADAS systems. Blockage occurs when the region of the bumper behind which radar is placed becomes electromagnetic opaque. This can be caused by several phenomena, most often by snow/ice, mud, and even condensation. There are two major effects caused by this phenomena, the first is an overall SNR loss for all targets, and the second is a strong reflection around the near-range that may mask nearby targets. The method proposed in this paper provides a solution to the second problem, being capable of unmasking even low RCS targets in the vicinity of the vehicle. This is essential for parking or driving in narrow streets, as you may reliably detect the nearest point of contact relative to the radar, that would otherwise be masked by the bumper and its debris.
Enhancing Automotive Radar Point Clouds through Cognitive Modulation Adaptation ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747940
- Metadaten: Erschienen: 2026-10-01 · S. 401-404 · OpenAlex seit 2026-11-04
- DE-Institutionen: Robert Bosch (Germany)
- Autoren:
- Yun-Kuan Su — Robert Bosch (Germany) (DE)
- Nicolai Kern — Robert Bosch (Germany) (DE)
- Benedikt Loesch — Robert Bosch (Germany) (DE)
- Alexander Georgievic Yarovoy — Delft University of Technology (NL)
- Francesco Fioranelli — Delft University of Technology (NL)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Non-Invasive Vital Sign Monitoring
- Keywords: cognitive radar; automotive radar; radar point clouds; deep reinforcement learning; reward function design; near-field sensing
- Abstract: Conventional automotive radars are limited by a fundamental trade-off between maximum detection range and high-resolution detail. To address this, this paper proposes a cognitive radar framework where a deep reinforcement learning agent dynamically adapts the radar’s modulation based on the point cloud. A systematic study on a simulated dataset of 55,000 frames reveals the impact of the reward function’s design. The reward consists of two components: one encouraging high-resolution measurement and the other one ensuring sufficient scene coverage to avoid missed object detection. By balancing the two components, the agent can increase the mean evaluation score used in this paper by more than 25%. This shows that balanced reward design is key to learning a policy that provides both detailed near-field sensing and consistent long-range awareness.
Harmonic Tag Based AGV Localization for Automated Parcel Handling at 61/122 GHz ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747379
- Metadaten: Erschienen: 2026-10-01 · S. 145-148 · OpenAlex seit 2026-11-04
- DE-Institutionen: Ruhr University Bochum; TU Dortmund University; Fraunhofer Institute for Material Flow and Logistics; Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Patrick Kwiatkowski — Ruhr University Bochum (DE)
- Irfan Fachrudin Priyanta — TU Dortmund University (DE)
- Dirk Höning — Fraunhofer Institute for Material Flow and Logistics (DE)
- Steffen Hansen — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Sonke Kauffmann — Fraunhofer Institute for Material Flow and Logistics (DE)
- Tobias T. Braun — Ruhr University Bochum (DE)
- Nils Pohl — Ruhr University Bochum (DE)
- Topics: Indoor and Outdoor Localization Technologies; Radar Systems and Signal Processing; RFID technology advancements
- Keywords: automated guided vehicles; harmonic radar; intralogistics; smart logistics; mobile radar; tag detection; positioning accuracy
- Abstract: Accurate self-localization of automated guided vehicles (AGVs) in smart logistics is challenging in cluttered environments, where camera- and Light Detection and Ranging (LiDAR)-based systems suffer from poor visibility, shadowing, and degraded feature detection. In this paper, we present a proof of concept for AGV self-localization in smart logistics using a compact harmonic radar system at 61/122 GHz. Unlike conventional approaches, a mobile radar on the AGV localizes itself via stationary frequency-doubling tags installed at key positions within a parcel station. The harmonic radar enables robust tag detection and precise AGV positioning, essential for automated parcel handling. Comparative measurements with an optical motion capture system show that the radar-based localization achieves an accuracy up to 3.5 mm in range and $\mathbf{0 . 7}^{\circ}$ in angle. These results demonstrate the potential of harmonic radar for reliable AGV self-localization in challenging intralogistics scenarios.
On Embedded Radiation Pattern Effects in MIMO Radar and Their Mitigation Using Dummy Antennas ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747590
- Metadaten: Erschienen: 2026-10-01 · S. 557-560 · OpenAlex seit 2026-11-04
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Niklas Frewer — Hamburg University of Technology (DE)
- Bartosz Tegowski — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Direction-of-Arrival Estimation Techniques; Antenna Design and Analysis; Radar Systems and Signal Processing
- Keywords: MIMO radar; mutual coupling; electromagnetic boundary conditions; direction of arrival estimation; beamforming; dense antenna arrays
- Abstract: In antenna arrays, mutual coupling and different electromagnetic boundary conditions cause distortions of the radiation patterns of the antennas, also referred to as embedded radiation pattern. These individual patterns differ in gain and phase and, thus, distort the array manifold. This contribution investigates the effect of the embedded radiation pattern in colocated multiple-input multiple-output MIMO radar, where this distortion affects array signal processing techniques and degrades the system performance. Dummy antennas placed at the edges of dense arrays provide a simple and effective means to equalize the electromagnetic boundary conditions. As a result, dummy antennas reduce pattern deformation and mitigate distortions in the array manifold. Numerical results for direction-of-arrival (DOA) estimation and beamforming demonstrate that performance degradation can be effectively mitigated by incorporating dummy antennas.
Occupancy Grid Mapping Using a Single-Channel Sub-6 GHz FMCW Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747478
- Metadaten: Erschienen: 2026-10-01 · S. 133-136 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- Max Basler — Universität Ulm (DE)
- Sven Thäle — Universität Ulm (DE)
- Ron Riekenbrauck — Universität Ulm (DE)
- Daniel Laqua — Universität Ulm (DE)
- Timo Grebner — Universität Ulm (DE)
- Christian Waldschmidt — Universität Ulm (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Robotics and Sensor-Based Localization
- Keywords: occupancy grid mapping; FMCW radar; synthetic aperture; probability maps; autonomous driving perception; integrated sensing and communication; parking spot detection
- Abstract: An accurate perception of the environment is essential for autonomous systems, where radar-based probabilistic maps provide robust representations of occupied and free areas. Probabilistic Occupancy Grid Mapping can be leveraged for this purpose, typically relying on mmWave multiple input multiple output (MIMO) radar to provide explicit angular information. However, in lower frequency ranges, which are increasingly relevant for joint communication and sensing (JCAS) applications, physical antenna arrays become prohibitively large. This paper proposes a processing chain to generate Occupancy Grid Maps (OGMs) based on sub-6 GHz single input single output (SISO) frequency-modulated continuous-wave (FMCW) radar data by utilizing a synthetic aperture approach. Experimental results from a parking lot scenario demonstrate an accurate distinction between occupied and unoccupied regions. This confirms the effectiveness of the proposed concept, making JCAS and parking spot detection feasible.
A Self-Supervised Continual Foundation Model for Configuration-Agnostic Radar Gesture Recognition ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747717
- Metadaten: Erschienen: 2026-10-01 · S. 317-320 · OpenAlex seit 2026-11-04
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Tobias Sukianto — Infineon Technologies (Germany) (DE)
- Matthias Wagner — Johannes Kepler University of Linz (AT)
- Wei Liu — Infineon Technologies (Germany) (DE)
- Sarah Seif — Infineon Technologies (Germany) (DE)
- Cecilia Carbonelli — Infineon Technologies (Germany) (DE)
- Mario Huemer — Johannes Kepler University of Linz (AT)
- Topics: Hand Gesture Recognition Systems; Domain Adaptation and Few-Shot Learning; Radar Systems and Signal Processing
- Keywords: FMCW radar; continual learning; catastrophic forgetting; self-supervised learning; foundation models; replay buffer; distribution shift; gesture recognition
- Abstract: Neural networks for frequency-modulated continuous wave radar gesture recognition are coupled to static radar configurations. Varying requirements necessitate changes to these configurations, creating a sequential stream of different radar configurations. Sequential fine-tuning on this stream triggers severe distributional shifts that overwrite knowledge from previous configurations, necessitating an adaptation mechanism to prevent catastrophic forgetting. We propose a self-supervised continual foundation model centered on our configuration-aware anti-forgetting (CAAF) mechanism. CAAF evaluates the difference in radar parameters between the current and past configurations to populate a replay buffer, prioritizing samples from the most parametrically distinct previous configurations. This work releases a multi-configuration dataset of 72,000 gestures across 24 radar configurations. CAAF achieves 95.69% average accuracy and reduces forgetting to a negligible -0.56%, outperforming state-of-the-art methods.
Investigation of Forward Looking SAR for Advanced Road Debris Detection ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747756
- Metadaten: Erschienen: 2026-10-01 · S. 149-152 · OpenAlex seit 2026-11-04
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Theresa Noegel — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Marc Reinecke — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Oliver Sura — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Max Heidbrink — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Advanced SAR Imaging Techniques; Synthetic Aperture Radar (SAR) Applications and Techniques; Radar Systems and Signal Processing
- Keywords: signal-to-clutter ratio; back-projection; small object detection; automotive radar
- Abstract: Road debris poses a significant safety risk and requires reliable detection. While camera- and lidar-based approaches depend on environmental conditions, radar-based methods are often limited by low signal-to-clutter ratios (SCR), especially for small objects with low radar cross section. This paper investigates forward-looking synthetic aperture radar (FL-SAR) using back-projection for road debris detection. A theoretical analysis of the SCR highlights the influence of range-dependent resolution and clutter characteristics, motivating the use of coherent SAR processing. Experimental results prove angle-dependency of the clutter floor in FL-SAR images and demonstrate an SCR improvement compared to MIMO imaging. Consequently, FL-SAR improves detection performance at longer ranges and reduces the requirements for subsequent processing steps. Overall, the results indicate that FL-SAR improves the detectability of road debris under relevant conditions, with performance gains depending on the scenario and system configuration.
Resolving Spatial Ambiguity in FMCW Radar for In-Air Writing Using Class-Conditioned Diffusion ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747860
- Metadaten: Erschienen: 2026-10-01 · S. 329-332 · OpenAlex seit 2026-11-04
- DE-Institutionen: Ruhr University Bochum
- Autoren:
- Salah Abouzaid — Ruhr University Bochum (DE)
- Nils Pohl — Ruhr University Bochum (DE)
- Topics: Hand Gesture Recognition Systems; Radar Systems and Signal Processing; Target Tracking and Data Fusion in Sensor Networks
- Keywords: FMCW radar; gesture recognition
- Abstract: 2D Trajectory reconstruction for in-air writing using a single-channel FMCW radar sensor suffers from severe spatial ambiguity by measuring only 1D range and radial velocity. While deploying multiple sensors resolves this ambiguity, it introduces significant hardware costs. We propose a Class-Conditioned 1D Diffusion Model that acts as a virtual secondary sensor, synthesizing missing radar measurements based solely on one physical radar’s observations and a target gesture class. During deployment, the synthesized measurements of the virtual sensor are fused with the real sensor data within a standard Extended Kalman Filter. Results demonstrate that the proposed diffusion model effectively resolves spatial ambiguity, enabling highly accurate, continuous 2D trajectory reconstruction of complex digits using only a single hardware sensor.
Comparison of a Signal-Processing-Synchronized Radar Network and a Repeater-Based Radar Network ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747733
- Metadaten: Erschienen: 2026-10-01 · S. 265-268 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- David Werbunat — Universität Ulm (DE)
- Julian Aguilar — Universität Ulm (DE)
- Christina Bonfert — Universität Ulm (DE)
- Christian Waldschmidt — Universität Ulm (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Direction-of-Arrival Estimation Techniques
- Keywords: radar network; automotive radar; direction of arrival estimation; OFDM radar; dynamic range; ghost targets; performance comparison
- Abstract: Radar networks improve the sensing capabilities of automotive radar systems, e.g., by enabling network-based direction of arrival (DoA) estimation. However, a fair and consistent performance comparison across different system and synchronization concepts is challenging. This paper establishes a systematic comparison of two fundamentally different radar network concepts: a signal-processing-synchronized radar network based on PMCW radars and a repeater-based network using an OFDM radar. Dynamic range, ghost target susceptibility, and DoA estimation performance are analyzed as key metrics. The results show that while this signal-processing-synchronized radar network is suited for well-defined scenarios, the repeater-based network is more suitable for automotive applications with strongly varying target power. The potential of the latter is verified by measurements. The proposed evaluation metrics are transferable to other radar network concepts, thereby facilitating their comparability.
Improved Range Separability and Maximum Velocity for Automotive FMCW Radar via Frequency-Stepped Chirp ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747807
- Metadaten: Erschienen: 2026-10-01 · S. 69-72 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Alexandru Gîrdianu — Universitatea Națională de Știință și Tehnologie Politehnica București (RO)
- Filip Alexandru Rosu — NXP (Germany) (DE)
- Andrei Anghel — Universitatea Națională de Știință și Tehnologie Politehnica București (RO)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Non-Invasive Vital Sign Monitoring
- Keywords: FMCW radar; automotive radar; waveform design
- Abstract: Automotive radar performance is increasingly constrained by memory resources and waveform bandwidth, limiting the simultaneous improvement of range separability and maximum unambiguous velocity. This paper proposes the use of the Frequency-Stepped Chirp (FSC) waveform as a radar-cube resource reallocation strategy for automotive FMCW radar. By redistributing radar-cube resources between the fast-time and slow-time domains, FSC enables multiple operating modes that, relative to conventional FMCW, improve range separability while extending the maximum range or preserving the original maximum unambiguous velocity under a constant radar-cube size. Motion-induced limitations are analyzed through an additional FSC phase term that produces Doppler-dependent energy spreading at high target velocities. Simulation and DDM-MIMO radar measurements demonstrate that FSC provides flexible operating points under fixed hardware constraints, showing that the improved Doppler sampling and extended velocity coverage can outweigh the increased motion-induced Doppler smearing.
How Submillimetre Mounting Errors Degrade Beamforming in Coherent Radar Networks ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747557
- Metadaten: Erschienen: 2026-10-01 · S. 261-264 · OpenAlex seit 2026-11-04
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Martin Grünbacher — Infineon Technologies (Germany) (DE)
- Mayeul Jeannin — Infineon Technologies (Germany) (DE)
- Matthias Wagner — Johannes Kepler University of Linz (AT)
- Mario Huemer — Johannes Kepler University of Linz (AT)
- Topics: Direction-of-Arrival Estimation Techniques; Radar Systems and Signal Processing; Antenna Design and Optimization
- Keywords: beamforming; millimeter-wave radar
- Abstract: Coherent radar networks synthesize large virtual arrays at mmWave frequencies but require relative node positions known to a fraction of the wavelength. Translational mounting errors introduce a target angle-dependent subarray phase error. We derive the power beam pattern in closed form and a closed-form expression for the direction of arrival (DoA) estimation bias in the single-target case, and show that the sensitivity depends on the translational mounting error direction. Simulations confirm that submillimetre mounting errors cause non-negligible DoA estimation bias and significant sidelobe level (SLL) degradation.
ARIFOMA: A Traffic-Driven Simulation Framework for Automotive Radar Interference Evaluation ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747205
- Metadaten: Erschienen: 2026-10-01 · S. 101-104 · OpenAlex seit 2026-11-04
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Arianit Preniqi — Johannes Kepler University of Linz (AT)
- Oliver E. Lang — Johannes Kepler University of Linz (AT)
- Stefan Schmalzl — Infineon Technologies (Germany) (DE)
- Reinhard Feger — Johannes Kepler University of Linz (AT)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Vehicular Ad Hoc Networks (VANETs)
- Keywords: automotive radar; FMCW radar; radar interference; interference mitigation; multi-lane traffic; SUMO; receiver bandwidth; simulation framework
- Abstract: Automotive frequency-modulated continuous-wave (FMCW) radars are increasingly deployed in vehicles, increasing the risk of mutual radar interference. This work presents automotive radar interference figures of merit analysis (ARIFOMA), a simulation framework for analyzing radar interference and mitigation strategies in realistic multi-lane traffic scenarios. Built on top of simulation of urban mobility (SUMO) and WiLabVISim, ARIFOMA implements radar-level signal modeling to quantify unified interference-related figures of merit (FOMs). A representative case study evaluates the influence of receiver bandwidth on interference at automotive corner radars, demonstrating the utility of ARIFOMA in statistical analysis.
Correlator bank optimization for sparse beamspace recovery using MIMO radars with analog correlators ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747547
- Metadaten: Erschienen: 2026-10-01 · S. 565-568 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Iosif Vardakis — Delft University of Technology (NL)
- Ashish Pandharipande — NXP (Germany) (DE)
- Nitin Jonathan Myers — Delft University of Technology (NL)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Direction-of-Arrival Estimation Techniques
- Keywords: MIMO radar; analog correlator; mixed integer programming; target detection probability; waveform design
- Abstract: Analog correlator-based radars perform matched filtering in the analog domain prior to digitization. Such a design consumes less power than fully digital radars, while still facilitating flexible waveform design over FMCW counterparts. Existing analog correlator-based radars, however, are limited to single input single output (SISO) setups. This paper considers a multiple-input multiple-output (MIMO) extension of such a radar, wherein only a limited number of analog matched filters per receive chain are available, owing to cost, power, and chip area constraints. We optimize the matched filters selected across the receive chains to enhance beamspace reconstruction via sparse recovery. To this end, we formulate a mixed-integer program under the constraint that only a limited number of matched filters can be selected at any receive chain. Simulation results show that the proposed selection of analog matched filters achieves a higher target detection probability than a typical random selection.
A 120/240 GHz Dualband FMCW Radar Frontend ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747239
- Metadaten: Erschienen: 2026-10-01 · S. 241-244 · OpenAlex seit 2026-11-04
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Maurice B. Schepers — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Christian Bredendiek — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Peter Knott — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Radar Systems and Signal Processing; Radio Frequency Integrated Circuit Design; Microwave Engineering and Waveguides
- Keywords: FMCW radar; MMIC; range resolution; linear phase response; millimeter-wave radar
- Abstract: A dualband 120/240 GHz frequency-modulated continuous wave (FMCW) radar based on in-house developed monolithic microwave integrated circuits (MMICs) is presented. The frontend provides two receive and transmit channels per frequency band that are interfaced via an adaptable multi-port waveguide flange. The system is validated by radar measurements that demonstrate high range resolution and linear phase response.
Measurement-based Enhanced Digital Radar Twin for High-fidelity Radar Simulation ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747762
- Metadaten: Erschienen: 2026-10-01 · S. 85-88 · OpenAlex seit 2026-11-04
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Oliver Sura — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Patrick Fenske — fiveD GmbH
- Desar Mejdani — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Peter Mergenthaler — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Max Heidbrink — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Tim Pfahler — fiveD GmbH
- Marcel Hoffmann — fiveD GmbH
- Martin Vossiek — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Electromagnetic Compatibility and Measurements
- Keywords: radar simulation; simulation fidelity
- Abstract: Radar simulation is an essential tool for the development, testing, and validation of modern radar systems. With increasing focus on simulation realism, the requirements for the digital radar twin (DRT) are rising. Since datasheet parameters alone are insufficient to describe a radar system at the required fidelity, this work presents a classification for DRTs that focuses solely on the radar representation, independent of scene and simulation core. Based on the defined classification, an efficient measurement-based self-characterization is proposed to determine an enhanced DRT. This approach extracts the required parameters using a simple measurement setup, without requiring detailed knowledge of the radar system’s RF parameters. The enhanced DRT is validated against measured data and compared with a state-of-the-art basic DRT. A strong agreement with the measurements and a clear improvement over the basic DRT is demonstrated, enabling high-quality radar raw-data simulation.
PN-PCT: A Hybrid Point-based Architecture for Automotive Radar Semantic Segmentation ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747251
- Metadaten: Erschienen: 2026-10-01 · S. 25-28 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Admitos Rafail Passadakis — Delft University of Technology (NL)
- Justin Dauwels — Delft University of Technology (NL)
- Francesco Fioranelli — Delft University of Technology (NL)
- Ashish Pandharipande — NXP (Germany) (DE)
- Topics: Advanced Neural Network Applications; Advanced SAR Imaging Techniques; 3D Shape Modeling and Analysis
- Keywords: automotive radar; semantic segmentation; point clouds; PointNet; point cloud transformer; hybrid architecture; local and global feature extraction; focal loss
- Abstract: Semantic segmentation on automotive radar points is vital for robust scene understanding in autonomous driving, particularly under adverse weather conditions where cameras and LiDARs fail. Nonetheless, radar point clouds pose unique challenges due to their sparsity, inherent noise, and irregular spatial density. Existing methods either focus on local geometric patterns through hierarchical modules, or leverage global relations via transformer-attention, but rarely utilize both effectively. We introduce PN-PCT, a neural network which integrates hierarchical feature learning from PointNet++ with the Point Cloud Transformer’s offset-attention. Our approach offers two innovations: (i) a hybrid architecture leveraging local and global feature extraction, and (ii) a combination of Focal and Dice losses that prioritizes both class imbalance and prediction overlap. Evaluated on RadarScenes, PN-PCT accomplishes 70.8% mIoU on multi-scan radar processing, with 12% fewer parameters and almost 50% lower inference time compared to state-of-the-art approaches, thus demonstrating superior performance.
Adaptive Beamforming with Rotating 2D Antenna ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747446
- Metadaten: Erschienen: 2026-10-01 · S. 577-580 · OpenAlex seit 2026-11-04
- DE-Institutionen: Hensoldt (Germany)
- Autoren:
- Thomas Schuster — Hensoldt (Germany) (DE)
- Topics: Direction-of-Arrival Estimation Techniques; Radar Systems and Signal Processing; Advanced SAR Imaging Techniques
- Keywords: adaptive beamforming; motion compensation; coherent processing interval; interference nulling
- Abstract: Adaptive Beamforming (ABF) is a well-established technique in Radar technology, used to introduce nulls into the receive antenna pattern and thereby mitigate the harmful influence of jammers and other interfering signal sources. Two principal approaches exist for acquiring the training data required by ABF: drawing samples from processed measurement data (Post-Doppler), or recording them during a passive training phase (Pre-Doppler). While the Pre-Doppler approach offers several practical advantages, it suffers from a fundamental limitation: relative angular movement of interferers between the training phase and the coherent processing interval (CPI) can degrade suppression performance considerably. This problem is especially acute when the antenna is rotating. The applicability of several established motion-compensation methods to a 2D radar antenna has been assessed. A new method is proposed that corrects for the phase change of the interference signals induced by antenna rotation.
Multibeam Sensing with Dedicated Slot in Cellular-based ISAC Systems ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747249
- Metadaten: Erschienen: 2026-10-01 · S. 197-200 · OpenAlex seit 2026-11-04
- DE-Institutionen: Karlsruhe Institute of Technology
- Autoren:
- Taewon Jeong — Karlsruhe Institute of Technology (DE)
- Xueyun Long — Karlsruhe Institute of Technology (DE)
- Lucas Giroto — Nokia Bell Labs
- Umut Utku Erdem — Karlsruhe Institute of Technology (DE)
- Thomas Zwick — Karlsruhe Institute of Technology (DE)
- Topics: Radar Systems and Signal Processing; Millimeter-Wave Propagation and Modeling; Indoor and Outdoor Localization Technologies
- Keywords: integrated sensing and communication; cellular networks; environmental sensing; OFDM radar; beam separation
- Abstract: This paper addresses environmental sensing with cellular-based integrated sensing and communication system using dedicated sensing resources. When the available time interval for sensing is limited (e.g., as in the case where only specific slots are allocated for sensing), sequential beam sweeping incurs a non-negligible overhead when scanning a wide field-of-view. To reduce this overhead, a multibeam transmission scheme is introduced in which multiple beams are transmitted simultaneously within each orthogonal frequency-division multiplexing (OFDM) symbol duration. Beam separation is achieved through interleaved subcarrier allocation, enabling beam-specific echo extraction at the receiver followed by conventional signal processing for the OFDM radar. The proposed approach is validated by ray-tracing simulations with 3rd Generation Partnership Project-compliant parameters in both open and dense urban environments, demonstrating its feasibility under realistic propagation conditions.
Terabit-per-Second Real-Time Chirp Synthesizer: An Ultra-Wideband Multi-Channel DDS Approach for RFSoC Radar Platforms ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747664
- Metadaten: Erschienen: 2026-10-01 · S. 237-240 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- Christian Gesell — Universität Ulm (DE)
- Lukas Paulus — Universität Ulm (DE)
- Simone Steinhauser — Universität Ulm (DE)
- Julian Aguilar — Universität Ulm (DE)
- Christian Waldschmidt — Universität Ulm (DE)
- Topics: Radar Systems and Signal Processing; Advancements in PLL and VCO Technologies; Radio Frequency Integrated Circuit Design
- Keywords: FMCW radar; digital radar; RF system-on-chip; direct digital synthesis; ultra-wideband; range resolution; phase coherence; software-defined radar
- Abstract: Digital radar systems enable rapid software-based reconfigurability. This is especially advantageous, as it allows for architecture adjustments depending on the application without change of the hardware itself. However, high data rates in signal generation and storage typically limit the achievable bandwidth and thus the range resolution of such systems. To address these limitations, a resource-efficient radio-frequency system-on-chip (RFSoC)-based architecture for generating frequency-modulated continuous wave (FMCW) chirps with a bandwidth of up to 4.9 GHz is presented. By scaling the concept to eight transmission channels, an aggregate on-chip data rate of over 1.25 Tbit/s is obtained. Measurement results verify the system’s performance, demonstrating high linearity, long term multi-channel phase coherency and high range resolution.
Smart Infrastructure Monitoring based on Ground Penetrating Radar with Explainable and Green AI ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747303
- Metadaten: Erschienen: 2026-10-01 · S. 321-324 · OpenAlex seit 2026-11-04
- DE-Institutionen: Friedrich-Alexander-Universität Erlangen-Nürnberg
- Autoren:
- Ingrid Ullmann — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Vasileios Belagiannis — Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- Topics: Geophysical Methods and Applications; Infrastructure Maintenance and Monitoring; Non-Destructive Testing Techniques
- Keywords: ground penetrating radar; subsurface cavity detection; infrastructure monitoring; explainable AI; Score-CAM; energy-efficient deep learning; model compression; radar image classification
- Abstract: In this paper, we investigate smart infrastructure monitoring based on ground penetrating radar (GPR) and artificial intelligence (AI). The smart system is supposed to detect subsurface cavities, which pose a safety threat. While AI has been investigated for GPR applications, two big challenges remain: First, deep learning models are black boxes and their reasoning is not transparent, making trustworthiness questionable. Second, the huge energy consumption of large AI models poses a significant environmental burden and limits their use in lightweight mobile GPR systems. Thus, the goal of this study is to design a system that can detect subsurface cavities in radar images with high accuracy, and at the same time is interpretable and energy-efficient. We employ the explainability tool Score-CAM to make the models’ reasonings transparent. To tackle sustainability, we investigate how far model size can be reduced while still achieving high classification accuracy and reasonable explanations.
Design of Sparse Modular MIMO Radar Arrays under Coherent, Quasi-Coherent, and Incoherent Operation ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747852
- Metadaten: Erschienen: 2026-10-01 · S. 313-316 · OpenAlex seit 2026-11-04
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Christian Kurtscheid — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Aitor Correas-Serrano — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jan Schröder — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Maria Antonia Gonzalez-Huici — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Antenna Design and Optimization; Direction-of-Arrival Estimation Techniques; Radar Systems and Signal Processing
- Keywords: sparse array synthesis; ambiguity function; incoherent operations; simulated annealing; bi-objective optimization; main lobe width; sidelobe level; angular resolution
- Abstract: Modular, distributed radar front-ends enable wide fields of view and high angular resolution at moderate hardware cost. This paper studies sparse array synthesis for modular MIMO radar under three coherence assumptions (fully coherent, quasi-coherent, and fully incoherent) within a unified ambiguity-function-based framework. Module locations and intra-module antenna positions are optimized under minimum-spacing constraints using simulated annealing. A bi-criteria design via $\varepsilon$-constraint formulation explores trade-offs between main-lobe width (MLW) and sidelobe level (SLL). Results show how coherence level, module count, and antennas per module jointly determine angular resolution and sidelobe behavior.
A Generic Virtual-Transmitter Decoder for Velocity Disambiguation in DDMA MIMO FMCW Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747342
- Metadaten: Erschienen: 2026-10-01 · S. 73-76 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Lea Volpin — Institut Polytechnique de Bordeaux (FR)
- Bertrand Le Gal — Université de Rennes (FR)
- Guillaume Ferré — Institut Polytechnique de Bordeaux (FR)
- Dominique Delbecq — NXP (Germany) (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Direction-of-Arrival Estimation Techniques
- Keywords: MIMO FMCW radar; automotive radar; direction of arrival estimation; constant false alarm rate detection; transmitter array
- Abstract: Automotive radar increasingly relies on larger transmitter arrays to improve Direction-of-Arrival (DoA) estimation in Multiple-Input Multiple-Output (MIMO) FMCW systems. Doppler Division Multiple Access (DDMA) enables transmitter orthogonality through progressive phase coding, thus enhancing numbers of transmitters. However, DDMA reduces the maximum unambiguous velocity as the number of transmitters increases. Virtual-transmitter methods address this issue by introducing an empty Doppler sub-band, yet most require the chirp count to be divisible by the number of transmitters, restricting systems that use power-of-two chirp numbers. This paper presents a method that removes this constraint. It exploits predictable non-uniform Doppler spacings arising when the sub-band period is non-integer. By matching spacing patterns to CFAR detections, the virtual sub-band is located, enabling correct Doppler association and restoring full unambiguous velocity without modifying the DDMA encoding.
Reduction of Radar Channel Spatial Variability in Medical Radar Applications by Means of Large Antenna Arrays ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747346
- Metadaten: Erschienen: 2026-10-01 · S. 213-216 · OpenAlex seit 2026-11-04
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Bartosz Tegowski — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Non-Invasive Vital Sign Monitoring; Radar Systems and Signal Processing; Millimeter-Wave Propagation and Modeling
- Keywords: large antenna arrays; vital sign detection; spatial diversity; millimeter-wave radar; phase variation; scattering measurement; 24 GHz
- Abstract: In radar-based vital-sign sensing, the radar sensor operates in the near field of the human body, which is an electrically large target at millimeter-wave frequencies. Consequently, already small-scale random variations of the relative position may lead to severe power level fading and phase variation, thereby potentially impeding the retrieval of vital sign information. To mitigate the spatial variability, this contribution analyzes the application of large antenna arrays rather than single low-directivity antennas. By exploiting spatial diversity, the radar channel variability can be significantly reduced. The simulative predictions are confirmed by scattering measurements with a human-like target at $\mathbf{2 4 ~ G H z}$.
Coherent Optical ISAR Imaging using Dual-Axis Motion Tracking ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747238
- Metadaten: Erschienen: 2026-10-01 · S. 1-4 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- Florentin Junghanns — Universität Ulm (DE)
- Christian Waldschmidt — Universität Ulm (DE)
- Mario Mueh — Universität Ulm (DE)
- Topics: Advanced SAR Imaging Techniques; Terahertz technology and applications; Advanced Photonic Communication Systems
- Keywords: inverse synthetic aperture radar; ISAR imaging; target motion estimation
- Abstract: Inverse Synthetic Aperture Radar (ISAR) is a well-established technique in coherent microwave radar for producing high-resolution multidimensional images of moving targets. Since resolution is fundamentally limited by aperture size and wavelength, transitioning from microwave to significantly shorter optical wavelengths offers substantial potential for improved imaging resolution. The present study builds on a recently developed coherent optical radar sensor, demonstrating its application in an ISAR measurement system. Operating at small optical wavelengths, the system demands extreme phase stability and precise knowledge of position data, which is highly dependent on the measurement setup. The position accuracy and motion of the imaging target within the setup is investigated, with the objective of analyzing the influence on the ISAR imaging quality. Utilizing a nearly ideal optical ISAR target, it is demonstrated that tracking and correcting for target movements in both down- and crossrange direction is imperative for achieving optimal image enhancement at optical frequencies.
From Lidar Point Clouds to Semi-Synthetic Radar Representations in Automotive Scenes ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747873
- Metadaten: Erschienen: 2026-10-01 · S. 97-100 · OpenAlex seit 2026-11-04
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques
- Autoren:
- Avinash Nittur Ramesh — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Aitor Correas-Serrano — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Maria Antonia Gonzalez Huici — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Advanced Optical Sensing Technologies
- Keywords: LiDAR point cloud; radar simulation; digital twin; data augmentation
- Abstract: Automotive radar perception relies on diverse, representative datasets, yet acquiring synchronized radar data in realistic scenarios is costly and sensor-specific. Fully synthetic simulations, on the other hand, require detailed scene models that struggle with complex environments. This work proposes using LiDAR point clouds as a geometric scene description, from which local surfaces are reconstructed, and radar responses are approximated via a simplified reflection model. Semi-synthetic radar data are generated using the SCARL simulator and validated against real measurements from the RaDelft dataset. Results show that relevant radar structures can be reproduced from scene geometry alone, while also exposing the limitations of the approach where radar-specific effects are not captured by the model. The proposed framework provides a lightweight basis for geometry-driven radar digital twinning, data augmentation, and exploration of sensing configurations.
Parametric Modeling of Cardiac Radar Signatures via Symbolic Regression ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747165
- Metadaten: Erschienen: 2026-10-01 · S. 325-328 · OpenAlex seit 2026-11-04
- DE-Institutionen: Hamburg University of Technology
- Autoren:
- Kristina Hess — Hamburg University of Technology (DE)
- Bartosz Tegowski — Hamburg University of Technology (DE)
- Frederik Vollmer — Hamburg University of Technology (DE)
- Alexander Koelpin — Hamburg University of Technology (DE)
- Topics: Non-Invasive Vital Sign Monitoring; ECG Monitoring and Analysis; Heart Rate Variability and Autonomic Control
- Keywords: heartbeat detection; symbolic regression; parametric modeling; vital signs monitoring; data augmentation
- Abstract: Due to its contactless nature, vital-sign monitoring using radar has gained increasing attention. The complex relationship between cardiac motion and radar signals makes signal analysis and the development of reliable heartbeat detection algorithms challenging. This work presents a symbolic regression approach for deriving analytical expressions of the phase and magnitude of radar heartbeat signatures, trained on measurements from 30 adults. Similar heartbeat morphologies are clustered prior to learning compact parametric formulas incorporating the heart rate frequency and sinusoidal components representing its harmonics, along with subject-specific scaling parameters. The models enable accurate signal reconstruction of the training data and synthetic heartbeat generation for arbitrary heart rate trajectories, supporting scalable data augmentation to train machine learning models without extensive measurement campaigns.
Coherent Band Combination for a Multi-Band Radar from 24 to 182 GHz using Compressed Sensing ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747678
- Metadaten: Erschienen: 2026-10-01 · S. 357-360 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- Nico Riese — Universität Ulm (DE)
- Christina Bonfert — Universität Ulm (DE)
- Alexander Grathwohl — Universität Ulm (DE)
- David Werbunat — Universität Ulm (DE)
- Christian Waldschmidt — Universität Ulm (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Sparse and Compressive Sensing Techniques
- Keywords: multiband radar; compressed sensing; range correction; phase correction; millimeter-wave radar; target separation
- Abstract: A coherent band combination approach for a multi-band radar system operating from 24.05-26.5 GHz, 76-84 GHz and 167-182 GHz is presented. This is enabled by a calibration procedure, which includes a range and phase correction for the respective sub-bands. The sparsity in the spectrum is filled using a compressed sensing algorithm. The increased separability of the combined radar spectrum is verified by radar measurements, where two targets with a distance of $\mathbf{2 . 5 ~ m m}$ are clearly resolved.
Temporal Graph Neural Network for ISAC Target Detection and Tracking ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747245
- Metadaten: Erschienen: 2026-10-01 · S. 409-412 · OpenAlex seit 2026-04-11
- DE-Institutionen: Technische Universität Ilmenau; Fraunhofer Institute for Integrated Circuits
- Autoren:
- Saiedeh Maboud Sanaie — Technische Universität Ilmenau (DE)
- Marcus Grossmann — Fraunhofer Institute for Integrated Circuits (DE)
- Markus Landmann — Fraunhofer Institute for Integrated Circuits (DE)
- Thomas Dallmann — Technische Universität Ilmenau (DE)
- Topics: Radar Systems and Signal Processing; Target Tracking and Data Fusion in Sensor Networks; Indoor and Outdoor Localization Technologies
- Keywords: integrated sensing and communication; multi-target tracking; target detection; temporal graph neural networks; delay-Doppler maps; data association; target clustering; 6G
- Abstract: Integrated sensing and communication (ISAC) is a key enabler of 6G, supporting environment-aware services. A fundamental sensing task in this setting is reliable multi-target detection and tracking. This paper proposes a temporal graph neural network (TGNN)-based tracking method that exploits delay and Doppler information from the wireless channel. The delay-Doppler map is modeled as a sequence of graphs, and tracking is formulated as a temporal node classification problem, enabling joint clustering and data association of dynamic targets. Using ray-tracing-based channel outputs as ground truth, the method is evaluated across multiple scenes with varying target positions, velocities, and trajectories and is compared with a Kalman filter baseline. Results demonstrate reduced normalized mean squared error (NMSE) in delay and Doppler, leading to more accurate multi-target tracking.
High-Resolution Motion Tracking in Automotive Crash Tests Using mm-Wave Harmonic Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747502
- Metadaten: Erschienen: 2026-10-01 · S. 361-364 · OpenAlex seit 2026-11-04
- DE-Institutionen: Fraunhofer Institute for High Frequency Physics and Radar Techniques; BMW (Germany); BMW Group (Germany); Ruhr University Bochum
- Autoren:
- Steffen Hansen — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Gunnar Briese — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jonas Siegfried Jehle — BMW (Germany) (DE); BMW Group (Germany) (DE)
- Armin Gabler — BMW (Germany) (DE); BMW Group (Germany) (DE)
- Dominic A. Funke — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Christian Krebs — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Jan Wessel — Fraunhofer Institute for High Frequency Physics and Radar Techniques (DE)
- Nils Pohl — Ruhr University Bochum (DE)
- Topics: Radar Systems and Signal Processing; Non-Invasive Vital Sign Monitoring; Terahertz technology and applications
- Keywords: motion tracking; FMCW radar; clutter suppression; airbag deployment; occupant dummies
- Abstract: The development and experimental validation of a mm-wave harmonic radar system for high-resolution motion tracking in automotive crash scenarios is demonstrated. The system operates in the 61/122 GHz ISM bands and uses active frequency-doubling tags. The use of harmonic radar enables effective suppression of clutter, allowing reliable detection of multiple tagged objects in a highly reflective and obstructed environment. The tag-MMIC is integrated into a metallic housing to enhance radiation performance and withstand the crash scenario. Two FMCW radar sensors are utilized to capture frontal and lateral motion components during a crash experiment. Experimental results from a catapult-based crash test demonstrate the capability of the system to measure critical parameters such as the minimum distance between the dummy’s head and the steering wheel, even in the presence of airbag deployment. The proposed approach shows potential for robust, high-precision sensing in harsh environments.
Interference Detection Method for Automotive Radar ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747294
- Metadaten: Erschienen: 2026-10-01 · S. 81-84 · OpenAlex seit 2026-11-04
- DE-Institutionen: NXP (Germany)
- Autoren:
- Gabriela Enescu — NXP (Germany) (DE)
- Filip Rosu — NXP (Germany) (DE)
- Adriana Brigalda — NXP (Germany) (DE)
- Pavel Agrigoroaei — NXP (Germany) (DE)
- David Bethge — NXP (Germany) (DE)
- Topics: Radar Systems and Signal Processing; Advanced SAR Imaging Techniques; Non-Invasive Vital Sign Monitoring
- Keywords: automotive radar; interference detection; interference mitigation; low-complexity detection; processing delay
- Abstract: Interference is a fast-growing problem for automotive radar, as more vehicles are being equipped with radar systems, significantly impacting radar’s performance, hence interference mitigation algorithms become mandatory. This paper describes a new method of interference detection, that estimates if the data is corrupted by interference, and in addition, gives a measure of the severity of the interference. Unlike typical interference mitigation approaches, our proposed method is intended to be permanently enabled without affecting the received signal integrity and without introducing any processing latency. The proposed method is tailored for embedded radar SoC computation. The numerical results achieved from both simulated and real-world data will highlight its accuracy and robustness for any type of interference use-case, while reducing complexity tenfold compared to state of the art approaches.
Detection of Wildlife-Snares using UAV-Borne SAR ⚑ DE
- DOI: 10.23919/eurad69232.2026.11747701
- Metadaten: Erschienen: 2026-10-01 · S. 505-508 · OpenAlex seit 2026-11-04
- DE-Institutionen: Universität Ulm
- Autoren:
- Tim Köhler — Universität Ulm (DE)
- Alexander Grathwohl — Universität Ulm (DE)
- Stephen Paine — University of Cape Town (ZA)
- David Gaynor — University of Pretoria (ZA)
- Christian Waldschmidt — Universität Ulm (DE)
- Topics: Advanced SAR Imaging Techniques; Synthetic Aperture Radar (SAR) Applications and Techniques; Geophysical Methods and Applications
- Keywords: synthetic aperture radar; FMCW radar; scattering properties; HH polarization; viewing angle dependence; full-wave simulation
- Abstract: Illegal hunting of wildlife poses a significant threat to biodiversity. Wire-snares are cheap and effective tools for poachers; however their slim structure makes them nearly invisible to ground patrols. This paper investigates the use of synthetic aperture radar (SAR) on uncrewed aerial vehicles (UAVs) to detect snares. This system is able to find objects occluded by sparse foliage and survey large areas efficiently. The unique, perspective-dependent scattering properties of wire-snares are analyzed through full wave simulations. These findings are validated using a UAV-borne high bandwidth frequency-modulated continuous-wave (FMCW) radar system operating from 1 GHz to 4 GHz, assessing the impact of center frequency, bandwidth, and perspective on snare detectability. The results show that the best detection performance is achieved using the band from 1 GHz to 2.1 GHz. HH polarization provides the highest contrast and is stable across viewing angles.
IEEE International Solid-State Circuits Conference (ISSCC) — 1 neu · conference
Tutorial: Fundamentals of Cryptography for Chip Designers: Classical to Post-Quantum ⚑ DE
- DOI: 10.1109/isscc49663.2026.11626316
- Metadaten: Erschienen: 2026-02-01 · S. 1 · OpenAlex seit 2026-07-31
- DE-Institutionen: Infineon Technologies (Germany)
- Autoren:
- Thomas Pöppelmann — Infineon Technologies (Germany) (DE)
- Topics: Cryptography and Residue Arithmetic; Cryptographic Implementations and Security; Cryptography and Data Security
- Keywords: post-quantum cryptography; classical cryptography; cryptographic hardware implementation; chip architecture; NIST PQC standardization; embedded microcontroller; memory requirements; communication interface
- Abstract: The advent of quantum computers poses a significant threat to digital communication systems. Now that the NIST post-quantum cryptography (PQC) standardization process has concluded, support for PQC is needed not only in high-end security systems but also in general purpose devices. During this tutorial we discuss how state-of-the-art classical cryptography works today and introduce the basics of PQC. We describe challenges faced by chip architects and IC designers when adding support for the new cryptographic schemes in silicon devices. Additionally, we examine techniques for secured implementation of PQC and how PQC might drive requirements for larger memories and faster communication interfaces in constrained devices like embedded microcontrollers.